Yunzii vn66 Wireless Hot Swappable Mechanical Keyboard User Manual
SCOPE OF APPLICATION:
X75 mechanical keyboard, 82 key design using RGB-light, Bluetooth-2.4G – wired three working modes and related equipment connection control, the product can run on the computer Windows2000,WindowsXP, Vista, Windows 7, doing, Win10 WIN 11, OS2 – version 2.0 and above with bluetooth version phone system. Native Bluetooth Device Name X75 3.0 or X75 5.0
HARDWARE REQUIREMENTS:
A mobile phone or computer with Bluetooth and a USB port available for connecting devices.
NOTE: X75 has only wired connection. X75 PRO has wireless connection.
THREE-MODE CONNECTION DIAGRAM:
KEYBOARD SWITCH DIAGRAM:
- Switch between MAC and WIN
- TYPE-C Indicates the connection port
- Bluetooth — wired –2.4G three-mode switch
- 2.4G receiver placement hole
X75-THREE MODE KEYBOARD INSTALLATION STEPS AND USE:
Bluetooth: FN+Q/W/E
- Turn on the Bluetooth button
- long press FN+Q/W/Eto pair device.
WIRED CONNETION
- Turn on the wired button
- Plug keyboard cable to device
2.4GHZ WIRELESS
- Turn on the wireless button
- Plug the 2.4G Dongle into keyboard
- Long Press FN+R to pair device
X75-THREE MODE KEYBOARD FN FUNCTION AND LIGHT OPERATION INSTRUCTIONS:
- FN +|\ = switch light mode
- FN+END= Change the light color
- FN+- Backspace=turn off the backlight, then press to turn it on
- FN+”t /‡”= Increase or decrease of light brightness
- FN+”-/→” = Light breathing or changing speed adjustment
- FN+CAP= One key on white light, then press exit
- FN+ESC reset with one key, all Bluetooth/2.4G are cleared and restored to wired mode, and the light returns to the initial state.
- FN+right ALT press and hold to inquire whether the electric quantity is 1-3 bright red when the electric quantity is lower than 3V, or green when the electric quantity is higher than 3V
The keyboard supports light modes:
Go WITH THE FLOW – default, such as shadow, sinusoidal wave, rotating windmill, colorful waterfall, flowers, steady on mode, breathing mode, dream rainbow, trigger, walking in the rain, rainbow roulette, button ripples, stars, no trace of snow, flow. The keyboard supports light colors: Red – green – blue – yellow – pink – cyan – white – mixed eight colors.
FN MULTIMEDIA FUNCTION KEYS IN WINDOWS:
FN
FN +
FN +
F2
F3
Computer screen brightness –
Computer screen brightness +
Calculator (calculator)
FN
FN
FN +
WIN Lock the WIN key and press it again + The computer
F5 player
F6 Inasong
FN
FN
FN
F7
F8
F9
The next song Play/Pause stop
FN
FIO
FN + F11
FN +
F12 mute
The volume –
The volume +
FN MULTIMEDIA FUNCTION KEYS ON MAC:
F1
F2
F3
Computer screen brightness-
Computer screen brightness+
CTRL + direction
F4
F5
F6 Frise sit donad sto release) CTRL+arrow key down Sleep function (key value 0x30)
F7
F8
F9 In a song The next song Pause/Play
F10 mute
F11 The volume –
F12 The volume +
Note: WIN/ALT will be interchanged when switching screens. Do not lock win
FN+F1=F1
FN+F2=F2
FN+F3=F3
FN+F5=F5
FN+F6=F6
FN+F7=F7
FN+F9=F9
FN+F10=F10
FN+F11=F11
FN+F4=F4
FN+F8=F8
FN+F12=F12
POINTS FOR ATTENTION:
- X75 three-mode keyboard has intelligent power saving function: when the keyboard is still not 2-3 minutes or so, the keyboard will automatically turn off the backlight -, this is to press any key can restore the light.
- in the use of X75 keyboard when plugged in the receiver, the computer can not identify the use, should consider the port contact caused by poor, need to replace the use of another computer USB port. When the keyboard is used, the backlight becomes dark or the product is not used normally, it should be confirmed that the product is caused by the lack of built-in power. There is a shortage of power to charge in time. When charging, it is necessary to connect the TYPE-C line with the keyboard to charge, and the charging time will vary according to the amount of power used by the charger. If the product is not used for a long time, please switch the product mode to the wired icon position.
- When the product is stuck or suddenly stationary in use, in addition to excluding the reason of low battery voltage, it should be caused by the interference of the same frequency signal in the environment. At this time, TYPE-C line can be used to connect the computer to wired mode. You can also switch the Bluetooth channel and 2.4G channel again to solve the problem. The code switching method is as shown above (the operation can be repeated if the code is not matched once).
- new Alliance wireless products are built-in lithium design, X75 keyboard uses (3300-4000 mah lithium) so for the safety of users, products can only be used at room temperature, please do not use in high temperature or close to the fire source place.
- Discard product damage: If the product is damaged and cannot be repaired, do not disassemble or throw it into the fire by yourself, so as to avoid accident danger. Should be sent to a professional waste disposal station or special recycling bin for processing.
LIST OF ITEMS:
- X75 transparent keyboard
- TYPE-C data cable
- pull shaft pull key two in one tool
- Warranty card instruction
- 2.46 receiver
REFRENCE LINK