Poly Voyager Focus UC – Stereo Bluetooth Headset Manual
Headset Overview
- LEDs/Online indicator
- Volume up
- Call button/Press to interact with Microsoft Teams (app required)
- Siri®, Google Assistant™ Smartphone feature: Default voice assistant
- Play/pause**
- Next track**
- Previous track**
- Volume down
- Charge port
- Power
- Bluetooth® pairing
- Mute/unmute
NOTE **Functionality varies by application. May not function with web-based apps.
Charge stand*
NOTE *Contents may vary by product. NOTE Both the charging stand and micro USB cable can be plugged into either a computer or wall charger. It is only necessary to plug the charge stand into a computer to update the firmware.
SB Bluetooth adapter
Your high-fidelity Bluetooth USB adapter comes pre-paired to your Poly device. Plug it into your computer to connect to computer audio. NOTE Adapter design may vary.
Standard LEDs
- USB LEDs What they mean
- Flashing red and blue Pairing
- Solid blue Headset connected
- Flashing blue On a call
- Solid red Mute active
- Flashing purple Streaming media from compute
LEDs when Microsoft Teams* is detected
- USB LEDs What they mean
- Flashing red and blue Pairing
- Solid purple Microsoft Teams connected
- Flashing blue On a call
- Solid red Mute active
- Pulsing purple Microsoft Teams notification
NOTE *Requires Microsoft Teams desktop application.
Connect to PC
Your Bluetooth USB adapter comes pre-paired to your headset.
- Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.
- The USB adapter LED flashes and then turns solid to indicate the headset is connected to the USB adapter. If you are wearing your headset you hear “PC connected” to indicate the connection has been established. When on a call, the LED on the USB adapter flashes blue. When not on a call the LED is solid.
- Load Poly Lens Desktop App by visiting poly.com/lens. This allows you to customize your headset behavior through advanced settings and options.
Configure USB adapter
Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music, you will need to configure your Bluetooth USB adapter.
Windows
- To configure your Bluetooth USB adapter to play music, go to the Start menu > Control Panel > Sound > Playback tab. Select Poly BT700 or Plantronics BT600, set it as the Default Device, and click OK.
- To pause music when you place or receive calls, go to the Start menu > Control Panel > Sound > Communications tab and select the desired parameter.
Mac
To configure the Bluetooth USB adapter, go to the Apple menu > System Preferences > Sound. On both the Input and Output tabs, select Poly BT700 or Plantronics BT600.
Pair to mobile device
- To put your headset in pair mode, slide and hold the Powerswitch away from the off position until you hear “pairing” and the headset LEDs flash red and blue.
- Activate Bluetooth on your phone and set it to search for new devices.
- Phone Settings > Bluetooth > On*
- Android Settings > Bluetooth On > Scan for devices*
NOTE *Menus may vary by device
- Select “Poly V43XX Series.” Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing. NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth adapter.
Pair the USB adapter again
Typically, your USB adapter is pre-paired to your headset. In the event that your adapter is disconnected or bought separately, you will need to pair the adapter to your headset.
Pair the BT700 USB adapter again
Your USB adapter requires Poly Lens Desktop App to pair to a Poly audio device. Download: poly.com/lens.
- Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it.
- Put your headset in pair mode.
- Launch Poly Lens Desktop App and navigate to Poly BT700.
- Put your Bluetooth USB adapter into pair mode by selecting “Pair new device” on the adapter’s main page or overflow menu. Your adapter flashes red and blue. Pairing is successful when you hear “pairing successful” and “PC connected” and the Bluetooth USB adapter LED is solid. NOTE To pair again using Plantronics Hub Desktop App, navigate to the app’s Poly BT700 general settings and select “Pair.”
Pair the BT600 USB adapter again
- Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it.
- Put your Poly audio device in pair mode.
- Put your Bluetooth USB adapter into pair mode by pressing and holding the recessed pair button with a pen or paperclip until the Bluetooth USB adapter flashes red and blue.
NOTE
Adapter design varies by USB connection. Pairing is successful when you hear “pairing successful” and “PC connected” and the Bluetooth USB adapter LED is solid.
NFC pairing
- Ensure NFC is on and your phone’s display is unlocked.
- Tap and hold the headphones to the phone’s NFC tag location until the NFC pairing completes. If necessary, accept the connection. TIP Keep an eye on your Smartphone’s screen for prompts to start and accept the pairing process.
NOTE The headphone’s NFC tag is located on the outside of the left ear cup. Phone NFC tag locations vary.
Fit and charge
Wear on the right or left
To position the microphone on the right or left side, rotate the microphone boom up and over. Adjust the boom so it points to the corner of your mouth.
TIP
Your headset senses when you change the microphone boom from one side to the other and syncs the audio and controls specific to each side.
Charge your headset
IMPORTANT Before using, charge the headset fully to reset the accuracy of the talk time prompts. Charge your headset with the charge stand or the micro USB cable. The headset LEDs flash when charging. It takes up to 2 hours to fully charge your headset. The LEDs turn off once charging is complete. NOTE Both the charging stand and micro USB cable can be plugged into either a computer or wall charger. It is only necessary to plug into a computer to update the firmware.
- Headset LEDs Battery status
- 4–5 blue blinks Battery high
- 2–3 blue blinks Battery medium
- 1 red blink Battery low
- flashing red Battery critical; Recharge headset
Check the headset battery status
There are several ways to check your headset battery status.
- Wearing the headset, tap the Call button, and listen to the voice alert (smartphone only).
- When not wearing the headset, tap any button except the Call button and observe the headset LEDs.
- Place the headset in the charging cradle and observe the headset LEDs.
Load software
Customize your device behavior through advanced settings and options with Poly Lens App. Some softphones require the installation of Poly software to enable device call control (answer/end and mute) functionality. Download: poly.com/lens. NOTE Device settings and updates are also available in Plantronics Hub App.
Update your Poly device
Keep your firmware and software up-to-date to improve performance and add new features to your Poly device. Update your device using your computer with Poly Lens Desktop App. Download at poly.com/lens. While updating:
- Do not use your Poly device until the update is complete.
- Disconnect your Poly device from paired devices such as phones, tablets, and computers.
- Do not start a second update from a second device.
- Do not stream media.
- Do not answer or place a call.
The Basics
- LEDs/Online indicator
- Volume up
- Call button/Press to interact with Microsoft Teams (app required)
- Siri®, Google Assistant™ Smartphone feature: Default voice assistant
- Play/pause**
- Next track**
- Previous track**
- Volume down
- Charge port
- Power
- Bluetooth® pairing
- Mute/unmute
Make/Take/End Calls
Answer or end a call
Tap the Callbutton.
Answer a second call
First, tap the Call buttonto end the current call, then tap the Call buttonagain to answer the new call.
Mute
While on an active call, tap the red Mutebutton.
Hold a call
To hold an active call, press the headset Mutebutton for 2 seconds. Press the Mute button to resume a held call.
Call back last call (smartphone)
To dial the last number you dialed, double-tap the Call button.To dial the last number you dialed, double-tap the Callbutton.
Answer calls from a second device
It’s easy to answer calls from two devices (including a softphone). When on a call, you hear a ringtone notification of the incoming call from the second paired device. To answer a second call from the other device, first, tap the Callbutton to end the current call and tap the Call button again to answer the new call. If you choose to not answer the second call, it will go to voicemail.
More Features
DeepSleep Mode
If you leave your headphones powered on but out of range of your paired phone or USB adapter for more than 7 days, your headset conserves its battery power by entering into DeepSleep mode. Once back in range with your phone or USB adapter, press the Call control button to exit DeepSleep mode.
Answer calls from a second device
It’s easy to answer calls from two devices (including a softphone). When on a call, you hear a ringtone notification of the incoming call from the second paired device. To answer a second call from the other device, first, tap the Call button to end the current call and tap the Call button again to answer the new call. If you choose to not answer the second call, it will go to voicemail.
Change language
You can change the voice prompt language of your headset (for example “mute on”).
- Load Poly Lens App on your computer. Download: poly.com/lens.
- Dock your headset in the charging stand and plug it directly into your computer.
- Disconnect your headset from other devices.
- Open Poly Lens App and go to your device’s Settings > Language to view language choices for voice prompts.
Troubleshooting
How do I pair my headset to a mobile device?
See Pair to mobile device
How do I pair my headset to a computer or laptop?
Plug in the USB Bluetooth adapter to your computer or laptop. The adapter is paired to your headset and connects to computer audio. See Connect to PC.
Why should I use the USB Bluetooth adapter instead of my computer’s Bluetooth?
Your USB Bluetooth adapter provides the best connection, softphone functionality, and acoustic sound quality through your headset. See Connect to PC, Configure USB adapter.
How do I pair my USB Bluetooth adapter to another supported Poly audio device?
Poly Lens Desktop App is required to pair your BT700 USB Bluetooth adapter to another device. Your Bluetooth adapter remembers up to 2 supported Poly audio devices but connects to only one at a time. See Pair USB adapter again.
Can I connect my headset to a mobile phone and computer at the same time?
Yes, your headset can connect to mobile and PC. Your headset remembers up to 8 devices but connects to up to 2 devices at a time. That includes the USB Bluetooth adapter.
(Teams model only) Does my Microsoft Teams-enabled headset work with other softphones?
Yes, while your headset is optimized for Microsoft Teams, it can be configured to use with other supported softphones. Set your target phone by going to Poly Lens Desktop App. When you configure another softphone, the Call button:
- doesn’t interact with Teams
- doesn’t go to Teams notifications
- will not launch Cortana
The headset audio is cutting out during softphone calls.
You may be experiencing Bluetooth density issues. Use density-friendly corded mode. See Corded mode (audio over USB).
I don’t have enough charge ports for my Bluetooth USB adapter and my optional charge stand.
Try the following:
- Plug your charge stand into a wall charger
- To charge your headset while connected to your computer, use corded mode. See Corded mode (audio over USB).
What’s in the box
Support
NEED MORE HELP?
poly.com/support
Manufacturer:
- Plantronics, Inc.
- 345 Encinal Street
- Santa Cruz, CA 95060
- United States
Plantronics B.V.
- Scorpius 171
- 2132 LR Hoofddorp
- Netherlands
Plantronics Ltd
- Building 4, Foundation Park
- Cannon Lane, Part 1st Floor
- Maidenhead, SL6 3UD
- United Kingdom
© 2023 Poly. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All trademarks are the property of their respective owners. Manufactured by Plantronics, Inc. Model ID: Headset: V4310/V4310-M/V4320/V4320-M, Adapter: BT700/BT700C, Charge Stand: CB4300. System: Poly Voyager 4300 UC Series has a V4310/V4310-M/ V4320/V4320-M headset, a BT700/BT700C adapter and may include a CB4300 charge stand.
REFERENCE LINK
https://www.poly.com/us/en/products/headsets/voyager/voyager-focus-uc