Veho VPP-008-E Endurance Water Resistant Power Bank Guide featured img

Veho VPP-008-E Endurance Water Resistant Power Bank Guide

Veho-logo

Veho VPP-008-E Endurance Water Resistant Power Bank Guide

Veho VPP-008-E Endurance Water Resistant Power Bank Guide prduct img

What’s in the box?

Veho VPP-008-E Endurance Water Resistant Power Bank Guide fig 1

Pebble Endurance, Micro USB to USB-A cable, USB-A to USB-C cable, User manual.

Guide to the display
The digital display on the Pebble Endurance shows the remaining battery charge that the Pebble Endurance has. The numbers displayed are the percentage of battery charge remaining from 00-99%. The display will not show the battery information of the device that the Pebble Endurance is charging.

Charging your Endurance

Veho VPP-008-E Endurance Water Resistant Power Bank Guide fig 2

Important!
Before connecting the Pebble Endurance to a power supply socket or port, please ensure that the voltage of the power supply is compatible with the ‘Power In’ of the power bank. Failure to do so will invalidate the warranty and could cause serious damage to the product. Connect the supplied Micro USB cable to the Micro USB input of the Endurance, and then connect the other end to a compatible USB port or plug. Alternatively, you can the USB-C cable to charge the Endurance. The USB-C is an input only and cannot be used to output charge from the Endurance to other mobile devices.

Charging your device

Veho VPP-008-E Endurance Water Resistant Power Bank Guide fig 3

Connect your device to the Pebble Endurance using the supplied USB cable or your device’s own USB cable. Once connected, turn the Pebble Endurance on by pressing the on button. The Pebble Endurance will start to charge your device and a small dot on the display will flash. To check the remaining capacity of the Pebble Endurance whilst charging your device, press the power button. The remaining capacity will display for 2 seconds.

Output when charging one or two devices
When charging only one device either USB port can output a maximum of 2.1A. The Pebble Endurance will detect the output required by your device to avoid overcharging. When charging two devices at the same ti me, using both USB ports, the 2.1A output will be shared by the two ports.

Using the torch

  • To turn the torch on or off, double-press the power button.

Specifications

  • Battery capacity 15,000mAh
  • Input Micro USB – 5V 2A / USB C – 5V 2A
  • Output USB – 5V 2.1A

REFERENCE LINK

https://veho-world.com/wp-content/uploads/2017/10/VPP-008-E.pdf

DOWNLOAD LINK

Veho VPP-008-E Endurance Water Resistant Power Bank Guide

Leave a Reply