Nesco VS-09 Deluxe Vacuum Sealer One Touch Fully Automatic User Guide

Nesco VS-09 Deluxe Vacuum Sealer One Touch Fully Automatic User Guide

IMPORTANT SAFEGUARDS

1. The appliance is designed for household use only. It is not intended for commercial use.
2.  To protect against electric shock, do not immerse the appliance, including cord and plug, in water or other liquid.
3. This appliance is not recommended for use by children.
4.   Call NESCO® Customer Service for examination, repair or adjustment.
5. Do not place appliance on or near a hot gas or electric burner, or heated oven.
6. Only use accessory attachments recommended by the manufacturer.
7.  Do not let the cord hang over the edge of a table or touch hot surfaces.
8.  Approved for one operating cycle every two minutes

Overview Of Components

1. Food Seal Time
2. Manual Seal
3.  Auto/Vac & Cancel
4.  Pulse Vacuum
5.  Canister
6. Hose Port
7.  Indicator Lights
8. Front Handle
9. Removable Bag Cutter
10.  Sealing Gasket
11.  Vacuum Chamber
12. Sealing Bar
13. Sealing Element
14.  Hose Accessory

Functions

1. Food Seal Time: Choose dry or moist setting depending on type of food.
2.  Auto/Vac & Cancel: Button will start automatic vacuuming and sealing or press to cancel operation of appliance.
3. Pulse Vacuum: Press this button to vacuum manually, release button to stop.
4.  Indicator Lights: Indicates status of vacuum or seal process.
5.  Front Handle – Lift handle to unlock and open cover. Push down to close and lock.
6.  Removable Bag Cutter: Remove bag cutter to use. Insert bag material into notch of cutter, press down and slide across to cut.
7.  Vacuum Chamber: Position open end of the bag inside chamber, draws air from bag and collects any excess liquid.
8.  Sealing Element: Non-stick heating element that seals bag and prevents it from sticking to the bar.
9. Hose Accessory: Connects to hose port. For sealing containers.

Operating Instructions

MAKING A BAG WITH A ROLL

1. Pull bag material from a roll to the suitable length you want and cut with scissors or the removable bag cutter.
2. Open front lid and place either open end of bag material on the sealing element. FIG. 1
3.  Close lid with handle and press down firmly to lock.
4.  Press the “Seal ” button to start sealing.

VACUUM PACKAGING YOUR FILLED BAG

1. Place food items inside the bag.
2. Open lid, clean and straighten the open end of the bag, make sure there are no wrinkles or ripples.
3.  Place the open end of the bag in vacuum chamber beneath positioning tabs. FIG. 2
4.  Close lid with handle and press down firmly to lock. Press the “Auto/Vac” Button. Bag will automatically be
   vacuumed and sealed.
5.   Lift handle and remove bag.

Vacuum Sealing Tips

• Do not overfill bags; leave enough space at open end of bag for better placement in vacuum chamber.
• Wet bags may be difficult to heat and seal tightly. Do not wet open end of bag.
•  Make sure nothing is left on open area of the bag, no wrinkles or creases should appear on the open panel, foreign objects or creased bags may cause difficulty to seal tightly.
• Do not vacuum package objects with sharp points (fish bones, hard shells). Sharp points may penetrate and tear bag.
• Store perishable foods in the freezer or refrigerator.

Care And Cleaning

Vacuum Sealer

1.  Clean vacuum sealer with a damp sponge. Do not immerse in water.
2.  Use a mild dish soap. Do not use abrasive cleaners as they will scratch the surface.

Bags

• Bag material can be washed in warm water with dish soap.
• Bags can be washed on the top rack in a dishwasher by turning the bags inside out.

Storing Your Vacuum Sealer

•  Keep appliance in a flat and safe place, and out of each of children.

Troubleshooting

VACUUM SEALER HAS NO POWER

• Check to see that the vacuum sealer is plugged in.
• Vacuum sealer will shut off automatically if overheated. Allow to cool down for 15 minutes and try again.
•  Check power cord and plug for damage. If damaged, do not use the vacuum sealer.

VACUUM SEALER DOES NOT PULL A COMPLETE VACUUM IN BAGS

• To seal properly, open end of bag should be resting entirely inside vacuum chamber area.
•  Check seal bar and gaskets for debris and position. Wipe clean and smooth them back into place.
• Vacuum sealer bag may have a leak. To test, seal the bag with some air in it, submerge in water, and apply pressure. Bubbles indicate a leak.

VACUUM SEALER NOT SEALING BAG PROPERLY

• Should sealing bar overheat and melt the bag, it may be necessary to lift the lid and allow the seal bar to cool for a few minutes. Reopen bag, wipe the top inside of the bag and smooth it out along the sealing
•  Check the bag for a puncture or hole which may have released the vacuum. Cushion sharp edges in the contents of the bag with paper towels.

REFERENCE LINK

https://www.nesco.com/