GROWNSY w3 Baby Bottle warmer featured

GROWNSY w3 Baby Bottle warmer User Manual

GROWNSY-Baby-Formula-Dispenser-Baby-Instant-Warmer-User-Manual-Image

GROWNSY w3 Baby Bottle warmer User Manual

GROWNSY w3 Baby Bottle warmer

OVERVIEW

GROWNSY w3 Baby Bottle warmer fig 1

INSTRUCTINS

GROWNSY w3 Baby Bottle warmer fig 2

Fast & Sterilize

GROWNSY w3 Baby Bottle warmer fig 3MODE 1-Quicker Fast Warming

  1. Put the milk bottle or water into the bottle warmer.
  2. Pour 80ml distilled water into the bottle warmer(It is recommended to use distilled water to prevent scale).
  3. Press the power button, Power light is on. Then touch the “Fast & Sterilize” function then “+” “-” to set heating time according to the Reference sheet as the followed(This bottle warmer have smart memory function only for fast warming,
  4. The bottle warmer will count down automatically and the screen shows the remaining heating time;it will “beep” when milk is ready. Please take it out in time to prevent overheating.
  5. Before feeding, shake the milk well and make sure the temp is suitable for feeding. it will remember the time setting of last time. Save your trouble to set time again under the same condition).The default time is 3mins and temp is 40℃/104℉. The bottle warmer will start working automatically in 3 seconds after you finished selecting function.

GROWNSY w3 Baby Bottle warmer fig 4

MODE2-Sterilize

  1. Pour 80ml distilled water into the bottle warmer(It is recommended to use distilled water to prevent scale.)
  2. Put bottles upside down and pacifiers both into the bottle warmer; cover the lid of bottle warmer, slightly touch the power button then touch “Sterilize”and “+” “-” to set heating time to15-20mins as you need. The bottle warmer will start working automatically in 3 seconds after you finished selecting function.
  3. The bottle warmer will count down automatically and the screen shows the remaining sterilizing time;it will turn to constant temperture when sterilizing is done. Be careful not to get burned when take the bottle out after sterilization.
  4. Bottle warmer will automatically off once the water dry out . Do not need to worry about the safety because GROWNSY bottle warmer is built with Anti Dry Heating function. Slightly touch the power button can help you suspend sterilization.

*Note: 1.Button”fast/sterilize” is designed for both fast warming and sterilizing, The only difference between them is the time setting.

Milk Warming & Defrosting

  1. Pour distilled water into the bottle warmer to scale line of the portable basket (the scale line is inside the basket).
  2. Take out the milk from the refrigerator and place it into the bottle warmer, then touch the power button and choose “Milk Warming” function according to Reference sheet as the followed; Touch “+/-” to choose volume of the milk to be warmed. The bottle warmer will start working automatically in 3 seconds after you finished selecting function.
  3. The screen shows the warming time after warmer works and it will “beep ” when milk is ready.
  4. Before feeding, shake the milk well and make sure the temp is suitable for feeding. Please take milk out in time when warming is done to prevent overheating. The heating time depends on the material of your bottles and the original temperature of the milk. The referenced time is as followed: (*The default time is based on glass bottle)

Descaling

It is recommended to descale the bottle warmer every four weeks to ensure it continues to work efficiently. 1.Mix 10g citric acid cleaner with 200ml/3.4oz of cold water to descale the bottle warmer.

Turn on the bottle warmer, select the STERILIZING FUCTION then wait for 2-3 minutes after boiling, the descaling is completed. 2.Mix 50ml/1.7 oz of white vinegar with 100ml/3.4oz of cold water to descale the bottle warmer.

Switch on the bottle warmer, select the MILK WARMING FUCTION and wait for 10 minutes. Leave the solution in the bottle warmer until all scale has dissolved.

Warranty&Customer Service

GROWNSY strives for user friendly products for newborn and household items. We aim not only to create a product, but also an item that is filled with care love from us to our customers.

For any product issue, please don’t hesitate to contact us directly to get quicker solution for your problem:

DOWNLOAD PDF

https://cdn.shopify.com/s/files/1/0280/5016/1725/files/W3_3040202022.pdf?v=1600685234

Leave a Reply