Waterpik WF-04 Side Kick Water Flosser Quick Guide

Waterpik WF-04 Side Kick Water Flosser Quick Guide

Step 1

Unit Prep

A. Connect power cord to power supply and to base unit. Plug into electrical outlet.

B. Assemble unit as shown.

C. Fill reservoir with warm water and place it firmly on the base. Slide pressure to high, point tip into sink, turn power ON until water flows. Turn power OFF.

Step 2

Water Floss

A. Slide to lowest pressure setting.

B. Place tip in mouth and close lips enough to prevent splashing. Turn power ON allowing water to flow from mouth into
the sink. Increase pressure to your liking.

C. Aim water at the gum line at a 90 degree angle. Follow the gum line and pause briefly between teeth.

This device is compatible with voltages of 100 – 240 VAC, 50/60 Hz.

DOWNLOAD PDF

WF-04-sidekick-water-flosser-quick-start-guide

REFERENCE LINK

visit waterpik.com/