BOSCH Water Overflow Leakage Alarm Sensor Detector User Guide
Safety instructions
- Do not open the device. It does not contain any parts for users to service. In the event of malfunctions, hand the device to a qualified technician for inspection.
- We cannot accept any liability for damage or injury caused by improper handling or failure to observe safety instructions. Such cases shall void all warranty! We accept no liability for consequential damage.
- For reasons of safety and conformity (CE), unapproved conversion and/or modification of the device is prohibited.
- For indoor use only. Keep the device away from vibrations, permanent direct sunlight or other heat radiation and excessively low temperatures. Protect it from physical loads.
- The device may only be used with Bosch original components and recommended partner products.
- The device is not a toy! Do not allow children to play with it. Do not leave packaging material lying around carelessly. Plastic foils and small parts can become dangerous toys for children.
LET’S GET STARTED
Install Smart Home Controller
If not yet installed: Download the Bosch Smart Home app and install the Bosch Smart Home Controller
N Start Smart Home App
Now start the Bosch Smart Home app and select “Add device”. Follow the instructions in the app.
Placing the product
Please ensure that the product is placed on a smooth, level surface so that any damp will be detected optimally.
Opening the device to change its batteries
To open the device, turn the lid anti-clockwise as far as it will go and pull it off upwards.
Acoustic test
Test the device’s correct operation regularly, e.g. prior to longer absences. Please refer to our website for an explanatory video on how to install the device at:
Technical data
| Device type name | BWA-1 |
| Battery type | 2 × LR03/ Micro/AAA |
| Battery life time | <3 years* |
| Radio protocol | ZigBee 3.0 |
| Radio frequency | 2.4 GHz |
| Max. transmission power | 10 mW |
| Radio range in free field condition | < 100 m |
| Receiver class | 2 |
| Software class | A |
| Protection class | IP 44 |
| Ambient temperature | 0 °C to 50 °C |
| Maximum humidity | 85 % non- condensing |
| Volume at a distance of 1 meter | ≤75 dB(A) |
| Dimensions (W × D× H) | 75 × 75 × 25 mm |
| Weight (w/o batteries) | 71 g |
Maintenance and cleaning
The device requires no maintenance. Clean the product with a soft, clean, dry and lint-free cloth. Moisten the cloth with lukewarm water to remove heavier soiling.
- The device is safety relevant. We therefore strongly advise against operation with rechargeable batteries. Please use only the supplied or equivalent batteries.
Environmental protection and disposal
Electrical and electronic equipment that is no longer usable and defective or used batteries must be separated from other waste and recycled in an environmenttally friendly manner. To dispose of electrical and electronic equipment or batteries, use your country-specific return and collection systems.
