Secrui WDB1R1CAA-x Wireless Doorbell User Manual
SAFETY INSTRUCTIONS
- Read the instructions for use carefully and keep them safe.
- Only use this device in accordance with the instructions in this user manual.
- The device is not a toy. Keep it out of the reach of children and pets.
WARNING! Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
General Safety
- Read the instructions for use carefully and keep them safe pass on this manual.
- Only use this device in accordance with instructions in this user manual.
- Do not place the device under any mechanical stress.
- Please handle the device carefully. Jolts, impacts or falls, even from a low height, can damage the device.
- Do not open the casing as this may result in electric shock.
- This device is not a toy and should be kept away from children and pets.
- Do not allow unsupervised children to clean or maintain this device.
- To avoid damage, never immerse the device in water or any other liquid.
- Retain the device’s user manual and packaging
Batteries and heat
- If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
- Keep batteries out of reach of children.
- Do not short circuit the contacts inside the battery compartment or any batteries. might damage the batteries.
could explode. - Do not expose the device and batteries to excessive heat sources like fire.
- Do not dispose the device in your household waste, as it contains batteries. Contact your local government offices for details.
INSTALLING AND USING THE DEVICE
Open the packaging carefully before taking out the device. Make sure its complete and undamaged. If any components are missing or damaged, contact the vendor and do not use the product. Retain the packaging or recycle it in accordance with local regulations.
- Remove all packaging from the device.
- Clean the device with a damp cloth. Please refer to the cleaning and maintenance’ section.
Parts and features
CHIME
- Melody selection button
- Volume button
- Mode selection
- LED light ON/OFF
- Ringer button
- LED light
- Name plate
- mounting plate
Inserting batteries Ringer
- Detach the mounting plate from the ringer.
- Open the round battery cover (10) of the device with a coin.
- Turn the battery cover counter clockwise to open it.
- Insert 1 x 3Vdc CR2032 battery (included), observing the polarities in the battery compartment.
- Put the battery cover back on the battery compartment. To secure the battery cover,turn it clockwise.
Chime
- Open the battery cover (9) by pulling the lip of the battery cover.
- Insert 2x 1.5 V dc AA batteries (not included), observing the polarities in the battery compartment.
- Replace the cover, closing the battery compartment (9)
Operating Instructions
pairing the ringer and chime
- Press and hold the melody selection button (1) on the chime for 3 seconds until you hear two short beeps.
- Press the button of the ringer (5) within 30 seconds. Two short beeps will sound, indicating the ringer is paired with the chime.
- Press the ringer button (5) to check correct operation.
Unpairing the ringer and chime
- Press and hold the melody selection button (1) on the chime for 10 seconds. The chime will sound two short beeps indicating the ringer and chime are unpaired.
Melody selection
- Press the melody selection button (1) on the chime to select one of the 18 available melodies.
- Each press will select another melody.
Installation ringer
Mounting with adhesive tape
The ringer can be mounted by using the included adhesive tape on the rear surface of the mounting plate. Adhesive tape can only be used on a dry and smooth surface, which is free of dirt and grease. In order to prepare the surface for putting the adhesive tape on the mounting plate, wipe the surface with a cloth soaked in degreaser, then wipe it dry before placing the mounting plate with the adhesive tape.
Installation chime
The portable chime can be placed in any desired location. It is possible to mount the chime. Check correct operation
before drilling any hole. To mount the chime, drill a hole at the desired position and push the mounting plug into the drilled hole.
CLEANING AND MAINTENANCE
Proper and regular cleaning will ensure safe operation and extend the lifespan of the device. Use a damp cloth to remove dirt from the device.
Attention!
- Do not clean the device with strong chemicals – or alkali-based, abrasive or disinfecting agents – because they
could damage the surface of the product. - Do not immerse the device into water or any other liquids.
TECHNICAL SPECIFICATIONS
- Frequency: 433,92 Mhz
- Input ringer: 3Vdc CR2032 battery
- Input chime: 3Vdc 2x AA battery
- Ringer: IP44
- Dimensions ringer: 3.9 x 9.4 x 2.2 cm (L x H x D)
- Dimensions chime : 7 x 12.4 x 2.3 cm (L x H x D)
- Net weight Ringer: 43 gram
- Net weight Chime: 89 gram
