WELLUE-FG01-Double-Head-Massage-Gun-User-Manual-feature-img

WELLUE FG01 Double-Head Massage Gun User Manual

WELLUE logo

WELLUE FG01 Double-Head Massage Gun User Manual

WELLUE-FG01-Double-Head-Massage-Gun-User-Manual-prduct-img

Introduction

Thank you for choosing this product. Please read the operation manual carefully before use and pay special attention to safety to operate and use this product correctly. This manual provides a safe and effective operation method for users. Please store properly after reading for future reference. Warning: This product is intended for general wellness use only. It should not be used to diagnose or treat any medical conditions.

The company reserves the right to improve the product and user manual. If any changes in technology parameters occur, the actual product shall prevail. No notifications will be made. Please understand that this manual has been carefully reviewed, but that does not mean it is free of printing errors or contextual misunderstandings:

Safety Precautions

Prohibited

  1. Children should not use or play with the product.
  2. Do not use this product if an injury has occurred.
  3. In the event of a muscular injury, consult your doctor before using this device.
  4. Do not use this product in cases of aneurysms, bleeding, blood thinners, etc.
  5. Do not use in sensitive areas: head, face, cervical spine, vertebrates, heart, or near the heart.
  6. Do not place fingers, hair, or other parts of the body near the axis of impact.
  7. Carefully use on hard or bony sections and select the appropriate power level to avoid causing discomfort.
  8. Do not use it immediately after meals to avoid discomfort.
  9. Do not use this product when drunk or unwell.
  10. Do not use it with lightning strikes.
  11. Do not use on bones; use this product only on soft tissues while avoiding causing pain or discomfort.
  12. Do not use if bruised, in pain, or discomforted.
  13. The device is contraindicated for use within 3 inches of internal fixation within 90 days of internal fixation.
  14. Do not wipe with gasoline, water, or other liquids. Do not spray with pesticides.
  15. Do not use in an environment with a temperature above 40ºC or place in open flames or elevated temperatures.
Warning
  1. When the product is used for a long period, the surface will become warm. It is normal.
  2. The battery used in this product is a dedicated rechargeable battery. Do not use it in other products. Do not charge a removed rechargeable battery.
  3. Keep the removed rechargeable batteries out of the reach of infants to prevent accidental ingestion. If swallowing occurs, seek medical advice immediately.
  4. If you have the following symptoms, consult a doctor and use based on advice from your doctor:
    • Users with implanted medical devices, such as pacemakers.
    • b. Patients receiving medical treatment or having recently had surgery, especially those with abnormal sensations .
    • c. Patients with malignant tumors, acute diseases, heart disease, severe hypertension, etc. (Requires monitoring).
    • d. Pregnant women or those who are menstruating
  5. People with damaged skin and those who need quiet recuperation.
  6. People with body temperature above 38ºC (febrile phase).
  7. Users with intellectual disabilities or minors must be supervised by a guardian or caretaker.
  8. Patients with infectious diseases, metal implants, or cardiac implants.
  9. Patients who are taking medication.
  10. Do not puncture with nails, impact from falls, or decompose.
  11. Do not connect the positive and negative poles of the battery directly with metal.
  12. Do not touch the liquid with your bare hands if the battery leaks to prevent personal injury.
  13. If the battery solution enters the eyes, there is a risk of blindness. Do not rub the eyes and wash immediately with clean water. Visit the hospital immediately
Mandatory
  1. Use for 15 minutes each time.
  2. The battery used in this product is a dedicated rechargeable battery. Do not use it in other products. Do not charge a removed rechargeable battery.
  3. During use, do not cover it with a blanket to avoid burs and fire due to overheating.
  4.  Do not block the air vent, otherwise damage may be caused by excessive internal temperature. Do not drop small articles into the opening.
  5. When cleaning the product, do not submerge the product.
  6. Please use authorized adapters, otherwise service life will be affected.
  7. If the product is moved from a low temperature to a warmer place, operations are often affected by condensation, possibly leading to failure. Store it at normal room temperature for one hour before use.
  8. Do not use unauthorized or incompatible batteries or power supplies because they may present a fire hazard.
  9. Do not use it for treatment purposes, and do not use other treatment devices while using this machine.
  10. Switch off if power is lost to avoid hazards during use.
  11. If you feel that the machine parts of the product are faulty or abnormal during use, stop using it immediately.
  12. If the power cord is damaged, do not disassemble or replace it without permission. Contact the distributor or a qualified professional to replace or repair it.

Adapted Symptoms

  1. Promotes edema fluid flow at the site of swelling
  2. Relaxes thickened connective tissue and fascia
  3. Reduces lactic acid in muscles
  4. Increases joint mobility
  5. Eliminates muscle fatigue

Product Parameters

NameDouble-Head Massage GunBody MaterialHigh

Quality Aluminum

Rated Voltage11.1VWELLUE-FG01-Double-Head-Massage-Gun-User-Manual-fig-1Charging InterfaceType-C
Product Size183*90*46mmBattery Capacity2000mAh
Massage Position4-Gear RegulationRated Power40W
Massage Head4 Models and 8 PiecesMassage TimeHigh Quality

Aluminum

Massage TimeAutomatically stops massaging every 15 minutes. For details, please refer to ” Preparation “.

Name and Functions of Handpiece

 

 

Massage heads (replaceable)

 

WELLUE-FG01-Double-Head-Massage-Gun-User-Manual-fig-2

Flat head

Suitable for relaxing and molding in various muscless

WELLUE-FG01-Double-Head-Massage-Gun-User-Manual-fig-3Spherical Head

Suitable for massaging various body parts, such as palms and soles

WELLUE-FG01-Double-Head-Massage-Gun-User-Manual-fig-4
U-shaped head

Suitable for massaging the neck and Achilles tendon

WELLUE-FG01-Double-Head-Massage-Gun-User-Manual-fig-6Conical head

Suitable for impacting deep tissue, such as meridian joints

WELLUE-FG01-Double-Head-Massage-Gun-User-Manual-fig-7 

Type-C cable

 

Preparation

  • Carefully inspect the product before use.
  • Before initial use, charge the product for about 3-4 hours to fully charge
    WELLUE-FG01-Double-Head-Massage-Gun-User-Manual-fig-8
  • Always recharge before the initial use.
  • When charging, this product cannot be started and used.
  • The signal light turns red while charging and green once fully charged.
  • When the battery is low, the signal light flashes red. Charge as soon as possible when this happens.
  • The default working time for each gear is 15 minutes. After 15 minutes of operation, the product will automatically stop massaging. If it needs to be continued, click the “WELLUE-FG01-Double-Head-Massage-Gun-User-Manual-fig-9 ” key. If nothing happens, the product will automatically shut down after 3 minutes of standby.

Application Method 

Power On/Off

  • Press and hold the key on the 3S host to turn it on.
  • When starting up, the signal light illuminates green once, and the four indicator lights illuminate in turn.
  • Press and hold the key on the 3S host again to shut it down.

Force regulation

  • The initial gear at startup refers to gear 1.
  • Click the key on the host once to increase by 1 gear.
  • The maximum gear is 4; click the key again when at gear 4, and the gear reverts to 1.
  • The indicator light prompts gear size: one light for gear 1, two lights for gear 2, and so on.

Massage Head Assembly Method

Select a suitable massage head, and firmly insert the massage head into the impact axis of the product host (as shown in the figure below).

WELLUE-FG01-Double-Head-Massage-Gun-User-Manual-fig-10

Prohibited
When the machine is started without massage heads installed, this part should not be touched to avoid pinching. When installing the massage heads to start the machine, do not touch this part to avoid pinching.

  1. Before starting a massage, check that the massage head is properly inserted for the safe use of this product. It is recommended to use this product step by step from low gear.
  2. Close the product, press and hold the product handle, forcefully pull out the massage head, and complete the disassembly.

Cleaning and Maintenance

Cleaning

  • Before cleaning, confirm that the power switch is turned off and that the power plug is removed from the socket.
  • Wipe the surfaces of the product and control panel with a soft cloth.
  • Dirty areas should be cleaned with a soft cloth dipped in water or a neutral solvent before drying with a dry cloth.

Caution

  1. Do not unplug the power cord with wet hands.
  2. Do not rinse the product with water or get water or other liquids inside the product.
  3. Do not use corrosive cleaners, such as benzene or diluents to clean the product because it may cause discoloration, corrosion, or cracking.
  4. When the product is wet, do not disassemble the product and allow the product to dry naturally.

Maintenance

  • Confirm that the power switch is turned off and that the power plug has been removed from the socket.
  • Keep the product clean and away from places with high humidity or high temperature and environments with volatile gases.
  • If this product is not used for a long time, cover the product with a dust cover (not included) to prevent dust build-up.

Warm tips
When used all year round, be sure to check for the following symptoms:

  • It smells burnt.
  • The products sometimes power on and off when the wire is touched.
  • The power cord is heating up.
  • Damage to the power cord.
  • Other abnormalities

Troubleshooting

Caution

  • If the aforementioned issues occur, please stop using the product to prevent failures or accidents from occurring.
  • Disconnect the power switch, unplug the plug, and contact the distributor or the company where you purchase this product.
  • Do not disassemble and repair without permission.
IssuePossible CauseResolution
 

Product emits loud sounds

New run-in period, normal phenomenonNo treatment needed
Possible loose parts inside the

product

Send for repairs
 

 

 

Fails to operate

Low batteryRecharge before use
Excessive operating time, overheating

motor

Allow the motor to cool naturally before

continuing use

Power switch

below handpiece not on

Turn on the power switch
 

Stopped during use

Due default workingSwitch on after an interval of 15 minutes
Low batteryCharge and reuse
Odor or smoke inside when workingProduct malfunctionStop using, turn off the power and send

for repair

Failing to charge for too short a battery

life

 

Battery aging

 

Replace the battery

If there are any abnormalities after the aforementioned resolutions, please contact your local distributor for maintenance.

Recovery Instructions

To protect the environment, after this product or its components are scrapped, you, as a consumer, are responsible for separating it from domestic garbage and sending it to a qualified recycling site, which will conduct classified disassembly, recycling, and reuse according to relevant national regulations. Name and content of hazardous substances in the product

Part NameHazardous Substance
PbHgCdCr(VI)PBB

s

PBDE

s

Enclosure
Circuit Board

Assembly

× 

 

 

 

 

Metal Parts
Rubber Parts
Connecting Wires
* Circuit board assemblies, including components made of printed circuit board machines, such as resistors, capacitors, integrated circuits, connectors, etc.

○ : It indicates that the content of this hazardous substance in all homogeneous materials of this part is below the limit requirements specified in GB/T26572.

× : It indicates that the content of this hazardous substance in at least one homogeneous material of this part exceeds the limit

requirements specified in GB/T26572.

 

 

Mark of Environmentally Friendly Service Life

The “Environmentally Friendly Service Life” of this product is good for 10 years, which is formulated by the enterprise based on product design characteristics. The “Environmentally Friendly Service Life” is only valid when the product is used under normal conditions as described in this Manual.

REFERENCE LINK

https://getwellue.com/

Leave a Reply