Kensington Wireless Presenter with Laser Pointer User Manual
Overview
CAUTION! IMPORTANT SAFETY INSTRUCTIONS
The Wireless Presenter with Laser Pointer includes a built-in laser pointer. Therefore, as with any laser pointer, it is important to adhere to the following warnings and safety instructions to prevent injury:
- Never shine a laser pointer into a person’s eyes, or stare into the laser beam. Pointing a laser pointer into a person’s eyes, or staring directly at the laser beam, can cause instant temporary vision dysfunction such as flash blindness, disorientation, or glare. This can be particularly dangerous if the exposed person is engaged in a vision-critical activity such as driving. In addition, prolonged and/or repeated exposure to the laser beam can be hazardous and damaging to the eyes.
- Never aim a laser pointer anywhere on any person or animal. Laser pointers are designed to illustrate inanimate objects only. In some states and provinces, it is illegal to aim a laser pointer on a law enforcement officer or on any other person. The purchaser/user is responsible for ensuring that his or her use of the laser pointer conforms to any local laws.
- Do not point a laser pointer at mirror-like surfaces. A reflected beam can act like a direct beam on the eyes.
- Laser pointers are not toys. Do not allow a minor to use a pointer unsupervised. In some states and provinces, it is illegal for a minor to purchase and/or use a pointer. The purchase/user is responsible for ensuring that his or her purchase or use of the laser pointer conforms to any local laws.
About your Wireless Presenter with Laser Pointer
The receiver has a single light indicator with 2 colors, green and red. For every button press of the presenter, the receiver LED quickly flashes green on the Presenter to indicate that the battery level is good. The LED will flash red on every button press if the battery level is low. The Wireless Presenter with Laser Pointer should work for up to one year with the batteries that come with it. This is based on average use. To extend battery life when not in use be sure to turn off the remote by inserting the receiver into the remote.
CLASS 2 LASER SAFETY STATEMENT
This laser device complies with International Standard IC 60825-1:2014 / EN 60825-1:2014, Class 2 Laser Product, and also complies with 21 CF 1040.10 and 1040.11, except for deviations pursuant to laser Notice No.50, dated Jun 24, 2007:
- Emission of a parallel beam of visible light;
- Maximum Power of 1 milliwatt CW, wavelength range 650+/-20 nanometers;
- Operating temp between 0° C(32° F) to 40° C(104° F).
- Do not disassemble the device
- Do not use the device outside of its specified operating temperature range. If the device is exposed to an environment outside of its prescribed operation, turn off the device and allow the temperature to stabilize within the specified operating range before using the device.
CAUTION!
A set of warning labels in different languages is provided with this product. It is essential that the correct country-specific warning label is applied to the laser pointer for the safety of the user and of the people nearby. This device has no serviceable parts. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
REFERENCE LINK
https://www.kensington.com/c/products/electronic-control-solutions/wireless-presenter-remote/
