Table of contents
show
Ghome WOOX R5104 Smart Power Strip User Manual
Specification
- Rated voltage: 230V~50Hz
- Rated current: 16A Max. total
- Rated power: 3680W Max. total
- Each USB output: Total 5V=2.4A Max.
- Total USB output: Total 5V=4.2A Max.
- Wi-Fi: IEEE 802.11 b/g/n 2.4GHz
- Max. Transmission Power: 17.8 dm
- Working temperature: -10 °C 40 °C
- Dimension: 350×71×42mm
- Cable length: 1.5 meters
- Bluetooth: Supported.
Requirement to use
- Wooxhomeapp
- WLAN-enabled router: 2.4GHz (Separate Band)
Set up Smart Power Strip to WOOX Home app
- Download and install the app “WOOX Home” from the Apple App Store or Google Play Store on your smartphone.
- Open Bluetooth on the smartphone
- Enable Bluetooth and location permission for the WOOX Home app, so that the app can find Smart Power Strip via Bluetooth.
- Launch the app “WOOX Home”
- Create a new account or log in to your existing account.
- Ensure the indicator light is quickly flashing. If the indicator light isn’t flashing: hold and press the pair button for 5 seconds until the indicator light starts to flash.
- Tap “+” to add the device.
- The Smart Power Strip will appear on the app. If Smart Power Strip does not appear, please check if The Bluetooth and location permission of WOOX Home apps are enabled in smartphone settings.
- Select the Smart Power Strip and continue.
- Confirm the Wi-Fi network and password.
Safety
- To reduce the risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
- The device is suitable for indoor use only: Do not use the device outdoors.
- Do not expose the product to water or moisture.
- Do not touch the device with wet hands.
Cleaning and maintenance Warning!
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions please visit www.wooxhome.com
REFERENCE LINK
https://wooxhome.com/products-c10/power-c2/woox-r5104-p80
DOWNLOAD PDF LINK
