Raycon Work Earbuds User Manual

Raycon Work Earbuds User Manual

Introduction

Welcome to your new Raycon Earbuds! We are Raycon. We create carefully crafted wireless audio products for go-getters who need tech that keeps up with them. We teamed up with expert engineers, leading taste-makers, and platinum artists to design products you’ll love to use. We believe in the early risers and the one-more-milers of the world. Premium audio, inspired by you. Before using your product, we strongly encourage you to fully read through this user guide. You can also visit our support center at www.rayconglobal.com/support. This web page has more specific guidelines and helpful videos for you to navigate your product. For best performance, charge fully before first use.

Unit At A Glance

1. Charging Port
2. LED/Battery Indicator
3. Lanyard Hook
4. Charging Connectors
5. Foam/Gel Tip
6. Microphone
7. Touch Control
8.  Wireless Charging Capsule
9. Sensor
10. Reset Button

Quickstart guide

1. Take your earbuds out of the capsule. Both earbuds will connect to each other automatically.
2. from the source device, go to Bluetooth settings, and ensure Bluetooth is on. Search for “The Everyday Earbuds” and select it to pair.
3. Enjoy your Raycon Everyday Earbuds!

Charging Device

• Charging Earbuds: The earbuds will charge automatically when placed in the capsule.
• Capsule Fully Charged: Once fully charged, the battery indicator lights will stay on.
• Call/Play time: about 8 hours
• Total battery life: 32 hours
  A fully charged capsule can completely recharge the earbuds up to 3 times before needing to recharge the capsule.
• Wireless Charging: Simply place the capsule on any Qi-compatible charging mat.
• Battery Status Indicator – After closing the lid of the charging capsule, the battery status indicator lights will display the remaining battery life.
• Low-Battery Warning – When earbud batteries are low, a “low battery” voice prompt will play, and there will be 30 mins of playtime left before the earbuds automatically power off.

QUICK START GUIDE

1. Take your earbuds out of the charging capsule. Both earbuds will power on and connect to each other automatically.
2. From the source device, go to Bluetooth settings and ensure Bluetooth is on. Search for “The Work Earbuds” and select it to pair.
3. Enjoy your Raycon Work Earbuds Ultra!

FUNCTIONS

Control audio and other functions by tapping the logo on the earbud.

Factory Reset

FACTORY RESET
First, delete the “The Work Earbuds Ultra” from the Bluetooth settings on your device, and place your earbuds back in the capsule. While earbuds are in the charging capsule, press and hold the “Raycon” button for 5 seconds or until the 4 battery indicator lights flash at the same time. Please ensure that the charging capsule has enough charge. Close the charging capsule to complete the reset function. Follow the instructions in the Quick Start Guide section to reconnect the earbuds to the Bluetooth device.

Safety Guidelines

Please follow the safety guidelines below at all times when operating or caring for your device.

• Be wary of any edges, uneven surfaces, and metal parts, including on accessories and product packaging, to prevent any possible injury or damage.
• Listen to music at a proper volume to avoid damaging your hearing and the earbuds.
• Do not store in high temperatures, such as in a hot vehicle or in direct sunlight.
• Do not expose the earbuds or any of their supplied parts to rain or other liquids for extended periods of time.
• Do not drop or cause undue impact to the earbuds.
• Do not modify, repair, or dismantle the product on your own.
• Do not use any diluent or volatile liquid to clean the product.
• Do not use the product in a hazardous location. Please keep your gel tips clean so that they don’t interfere with your appreciation of the music.

SPECIFICATION

• Model Number: RBE785
• Bluetooth Name: The Work Earbuds Ultra
• REID: D785-0821
• Bluetooth version: 5.0
• Power Input: 5V/1A
• Capsule charging time: 1.5 hours
• Earbud charging time: 1.5 hours
• Call/Play time: About 8 hours
• Total battery life: About 32 hours
• Charging earbuds by capsule: 3 times
• Standby time: 6 Months
• Support Profiles: HSP/HFP/A2DP/AVRCP
• Sensitivity: 107±3dB
• Frequency Response Range: 20Hz-20KHz
• Bluetooth Range: Up to 10 Meters

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet the general RF exposure statement. The device can be used in portable exposure conditions without restriction

IC Caution:

English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

REFERENCE LINK

Download PDF

E85_Manual_210705_copy_1_compressed