Table of contents
show
JALL WX18039 Digital Alarm Clock User Instructions
Package Includes:
- 1 x Digital Alarm Clock
- 1 x User Manual
- 1 x USB Type C Cable
- 1 x 5V 2A Power Adapter
Overview
Front
- AM/PM Indicator: AM/PM Indicator is for 12-hour system only.
- Alarm Indicator: If you switch on 1 of the alarms, it will be on.
- Wireless Charging Area: Please place your phone in the center area.
- Humidity: This shows the current indoor humidity level, which is detected by a sensor and cannot be manually changed.
- Temperature: This shows the current indoor temperature in Celsius or Fahrenheit, which is detected by a sensor and cannot be manually changed.
Back
- Time Set: Hold the “TIME” button, then use the scroll wheel to set “Year”, “Date”, “Time”.
- Volume: Press the “Vol” button once to adjust the volume of the alarm. There are 5 levels to choose from: V1-V5.
- ℃ / ℉ Switch: Press the “°C / °F” button once to switch between Celsius and Fahrenheit on the display.
- Alarm 3 / 2 / 1 Set: Press the “Alarm” button once will turn the alarm ON or OFF. – Hold the “Alarm” button to enter the alarm setting mode. Notice: The alarm will be turned ON by default after setting the alarm.
- 12/24H Switch: A convenient switch to toggle between 12-hour and 24-hour display modes.
- CR 2032: The CR2032 battery is used to retain your alarm settings, allowing the clock to restore the current time with out re-setting after power is restored.
- Scroll Wheel – Turn it to adjust brightness in normal status, or select value in setting menu. 3 / 8
- Reset: If you find the clock works abnormally, you can use a small stick to push “RESET” button to initialize.
- Alarm 3/2/1 Mode Switch: “MON-SUN” = Every day; “MON-FRI” = Weekday mode, only activates the alarm on Monday through Friday. “SAT-SUN” = Weekend mode, only activates the alarm on Saturday and Sunday.
- Power Input: Please use the original power cord and adapter. If missing, please contact us
Operating Instructions:
Product Features:
- Input Voltage: AC 110v-240V, 50/60 HZ.
- Output Voltage: DC5V / 500MA-2100MA.
Trouble Shooting:
- Missing power cord, or instructions, please contact us on Amazon or by email for a new replacement.
- Please understand the temperature sensor is pre-set inside the clock. As electronic components may produce heat when working. So it’s normal that the temperature is not as accurate as other professional thermometer. If some numbers are getting dimmer or flash constantly, please take a picture or a short video and contact us for a new replacement.
- Please use the original power cord and adapter to work. If it’s broken, please contact us for a new power cord & adapter.
- If you find the clock fails to remember settings. You have to take out the battery shelf on the back of the clock to change CR2032 battery. 6) Default display content includes Time, Temperature, Humidity. It cannot hide temperature or humidity.
