NIZ X108EC(RGB)Blue Gaming Keyboard User Manual
Keyboard Function Illustrate
Menu for backlight
FN+ | ~` |
= | Specific lights | Programming software definitions, first press in, second press out, Shutdown memory. |
!1 |
Quick color | With every click RGB lights of the keyboard will loop switch between red-green-blue-purple-green-white-off-sunset-relax; Shutdown memory.(sunset is warm colour,relax is cold colour, dynamically) | ||
@2 |
Meteor shower | First press for the single light meteor shower, second press for five lights meteor shower, third press for the exit. The background are chosen by specific lights and seven color switch; the time lights stranded are chosen by FN+←/→; Shutdown memory. | ||
#3 |
Ripple/Aurora | First press for ripple, second press for aurora, third press for exit; the background are chosen by specific lights and seven color switch; the time lights stranded are chosen by FN+←/→; Shutdown memory. | ||
$4 |
Breath | First press for single light breath(the background are chosen by specific lights and seven color switch), second press for seven lights loop switch breath, third press for exit; the frequency are chosen by FN+←/→; Shutdown memory. | ||
%5 | Demo | Demonstrate all kinds of lights. Stop the demo by FN+SPACE. The frequency is chosen by FN+←/→; Shutdown memory. | ||
&7 | R1 | Short press to backlight R1; Long press to backlight R1 record. | ||
*8 | R2 | Short press to backlight R2; Long press to backlight R2 record. | ||
(9 | R3 | Short press to backlight R3; Long press to backlight R3 record. | ||
)0 | R4 | Short press to backlight R4; Long press to backlight R4 record. | ||
_- | R5 | Short press to backlight R5; Long press to backlight R5 record. | ||
+= | R6 | Short press to backlight R6; Long press to backlight R6 record. |
F10 | Backlight off | Open/Close the backlight; Shutdown memory | ||
↑ | = | luminance + | Add luminance in 6 levels | |
↓ | luminance – | Minus luminance in 6 levels, | ||
← | Frequency + | Regulate the time of light effects in 5 levels | ||
→ | Frequency – | Regulate the time of light effects in 5 levels |
Special keys Function table
FN+ | ESC |
= | Keyboard Lock | Lock/Open the keyboard; if the keyboard has been locked, it won’t react to the press. Shutdown doesn’t memory |
F9 | Adjust trigger point | Adjustable Trigger point (high/low stage) The shutdown doesn’t have memory. Default in the fit trigger point. | ||
L-Ctrl | Caps/Ctrl exchange | Press 3 seconds to Achieve the exchange between “left Ctrl” and “Caps”. Shutdown doesn’t memory | ||
L-Alt |
Win/Mac | Press 3 seconds for indicator flash 2 times, Match Mac OS( Achieve the exchange between “Left Win” and “Left Alt”, “Right Alt be a place of Right Win”, “Menu be a place of Right Alt”). Press 3 seconds for indicator flash 1 time, match Win OS(key to return), Shutdown memory Note:1.In wired mode and match Mac OS, that needs waiting for some time. 2. If you want to open programming software, you need to match to Win OS(indicator flash 1 time), otherwise you won’t be able to open the programming software. |
- Press the ”M” Key to exchange Office mode and Program mode, ”M” Light is turned off in Office mode, and” M” Light is turned on in Program mode. Shutdown memory.
- Press the touch switch in the upper left corner to Lock/Open. Disable in Mac OS; shutdown memory.
USB,PS/2 Interface settings
Press “FN + Backspace” for 5 seconds, the indicator flashes 1 time to USB, the indicator flash 2 times to auto-identify for USB, PS/2.and restart the keyboard. The default settings are set to USB.
Clear Key Counter
Press “ FN + Delete” for 5 seconds, the indicator flash, and the key counter will be clear.
Restore factory settings
Press “ESC + L-ctrl + F12+ R-ctrl” for 5 seconds will restore factory settings, and restore factory settings will restart.
How to configure the backlight
Single-click the “LightSet” Key on the main screen of the Programming software, and the dialog box of the “Backlight settings panel” will pop out. Single press the “Set All” key, choose the color in the dialog box of “color” that pops out and confirm. Then fast set up all the key colors as the chosen color. Single press the “Multi key” key, and the dialog box of “Set Multi Key panel” will pop out, choose the key of needs to be set and it will show the chosen status. Then singletree the “Set Color” key, choose the color in the dialog box of “color“ that pops out and confirm. Then set up many key colors as the chosen color. With a single press on any key on the backlight interface, choose the color in the dialog box of “color” that pops out and confirms. Then fast set up the chosen key color as the chosen color. Click on the “Program” Key after setting up the backlight, and finish the setup for the custom backlight.
Backlight settings interface
Set Multi Key interface
How to configure the keyboard:
Under OFFICE mode, press the “M” key on the top right corner, the “M” light turn on, then goes into custom mode. And goes into the OFFICE mode in the opposite way. All keys on the keyboard are divided into the Top layer and the FN layer, FN layer can output only when combined with the FN key. When finishing the setup of all keys in the programming software, to save and synchronize the configuration with keys, single click the “WriteKeys” on the main screen.
Single click the “Read configuration” on the main screen, it will read the standard configuration of OFFICE mode when under the OFFICE mode and read the custom configuration under custom mode. When the “M” light is on, the keyboard is under custom mode, all the custom functions can be used.
Programming Software Main Interface
single key/combine keys
- A single click on the key you need to configure, click “Uni/ combo” in the
“KeySettings” surface. - Choose “Single” or “Combo”, and single click “Record” to record the keys, combinekeys can record six at most.
- single click “OK”.
Single/Combo keys surface
Macro definition
The keyboard can be defined in the overall definition under a custom mode and shows a strong programmable feature.
How to set up a delay
Delay is the time between the press and the release of keys. keyboard has the automatic delay record and can modify delay time: Set up automatic delay record: drive automatic records the time that typing actions need; Modify delay time(50ms-60000ms, 1000ms=1s): after defining a macro, single click the delay time two keys already have, then the delay time will become to be editable and edit the delay time. single click the other area of the record list to exit the editable status.
How to insert the mouse and delay
After recording a macro, right-click the key in the edit list, choose to operate the insert mouse, and delay.
Macro definition key interface
Simulate keystroke
What is a simulated keystroke?
Simulate keystroke is the function that after you click the simulated key, the keyboard will simulate the keystroke at a fast speed, it ends when the key bounce, and it can also set up the speed of keystroke.
How to set up a simulated keystroke?
- Single click the key you need to configure, click “keystroke” in the “keys set up panel”;
- Choose “New” on the left side of the appeared window;
- hoose a new-built keystroke, set up the keystroke time in the edit list on the right side, singly click “Record”, type in the keys that need define, then click “Stop Rec”, simulate keystroke can record six at most;
- Single click “OK”.
simulate keystroke interface
Multi-Media
The keyboard supports the usual function for multi-media, custom multi-media simplifies the layout of the keyboard.
- Single click the key you need to configure, single click “Multimedia”;
- Choose custom multi-media in the multi-media interface, then click “OK”.
Multi-media interface
Mouse
The keyboard support Mouse.
- Single-click the key you need to configure, click “Mouse” in the dialog box of “Key Settings” that pops out;
- Choose custom mouse functions in the mouse panel, then click “OK”.
Mouse interface
Function Key
The control key is divided into the key function and the backlight function.
- Single click the key you need to configure, click “Funcion” in the dialog box of “key Settings” that pops out;
- Choose custom functions in the control key panel, then click “OK”.
Empty configuration
There are two circumstances for an empty configuration, one is an empty single-key configuration, and the other is an empty of all the configure keys. To empty the single key configuration, just single-click the key and choose “Clear” in the set window. To empty all the configurations, single click “Clear” in the function bar on the main screen.