SONY XBA-H3 Hybrid 3-Way In-Ear Headphones User Manual
How to use
- Wear the headphones placing the hanger behind the ear. Hold the headphones, and curve the hanger into an ear shape beforehand.
- Adjust the angle of the headphones to fit snugly.
- Adjust the hanger to fit behind the ear.
Earbuds
Hybrid silicone rubber earbuds
Foamed silicone earbuds
Replacing the cord
To detach the cord
Notes
- If the hanger is pulled directly, it may break. Pull from the base of the hanger.
- Do not twist the base of the hanger, as it may break.
- Do not pull at an angle when removing the cord, as removal may be difficult.
To attach the cord
Note
- When attaching the cord, match the color coding of the connecting parts.
Carrying case
Note
Do not close the case forcibly without winding up the cord. Otherwise, the cord may break,
If you install the Smart Key app* from the Google PlayTM store, the track and volume adjustment on your smartphone will be enabled with the multi-function button.
- Smart Key is an application for XperiaTM, AndroidTM OS 4.0 and above. The app may not be available in some countries and/or regions, and may not be used with unsupported smartphone models
https://play.google.com/store/apps/details?id=com.sonymobile.extras.liveware.extension.smartkey
Features
- HD Hybrid 3-way Driver unit Sony’s unique HD Hybrid 3-way driver unit (16 mm dynamic driver unit and two Balanced Armature driver units) for music enjoyment over the entire frequency range. The driver units deliver radiant highs and deep, bellowing bass while maintaining subtle musical nuances.
- HD Super Tweeter Rigid, lightweight aluminum diaphragm delivers ultra-high frequency sound.
- Liquid Crystal Polymer Film Diaphragm for Dynamic Driver Unit A Liquid Crystal Polymer Film Diaphragm provides the needed rigidity and internal loss for balanced and highly accurate sound reproduction.
- Beat Response Control with acoustic load tube (improves diaphragm movement) delivers tight and deep bass response, perfect for today’s music.
- Suppression Housing Each driver is placed into one suppression housing. The housing material suppresses unwanted vibrations to reproduce crystal-clear sound.
- Detachable cord 3.5 mm connecting cord, and inline remote and microphone cord for smartphones.
- Freely-adjustable Ear Hanger Soft, shape-memory resin Teknorote® silicone-covered ear hanger for a superior and stable fit to each ear.
- Foamed Silicone Earbuds Stable fitting and high isolation for ambient noise with soft foamed silicone inside of earbuds.
Compatible products
Use this unit with smartphones
Notes
- If you connect to an unsupported smartphone, the microphone of this unit may not function, or the volume level may be low.
- This unit is not guaranteed to operate digital music players.
Available operations for iPhone
Plays/pauses a track of the connected iPhone product with a single press. Skips to the next track with a double press. Skips to the previous track with a triple press. Starts the “VoiceOver**” feature with a long press (if available). Hold down for about two seconds to reject an incoming call. When you let go, two low beeps confirm the call was rejected.
- The button function may vary depending on the smartphone.
- Availability of the “VoiceOver” feature depends on the iPhone and its software version.
Specifications
Headphones
- Type: Closed, hybrid
- Driver unit: Hybrid 3-way (16 mm dynamic + two Balanced Armature)
- Power handling capacity: 100 mW (IEC*)
- Impedance: 40 Ω (at 1 kHz)
- Sensitivity: 107 dB/mW / Frequency response: 3 Hz – 40,000 Hz
- Cord: Approx. 1.2 m (47 1 /4 in), OFC Litz cord (detachable ear hanger, Y-type)
- Plug: Gold-plated L-shaped stereo mini plug, four-conductor gold-plated L-shaped stereo mini plug
- Mass: Approx. 10 g (0.36 oz) without cord.
Microphone
- Design: In-line microphone
- Type: Electret condenser
- Open circuit voltage level: –40 dB (0 dB = 1 V/Pa)
- Effective frequency range: 20 Hz – 20,000 Hz
Supplied accessories:
Hybrid silicone rubber earbuds: SS (red) (2), S (orange) (2), M (green) (attached to the unit at the factory) (2), L (light blue) (2) / Foamed silicone earbuds: S (orange) (2), M (green) (2), L (light blue) (2) / Cord adjuster (winds cord up to 50 cm) (1) / Clip (1) / Carrying case (1) / Detachable ear hanger cord with remote control (approx. 1.2 m OFC litz cord, four-conductor gold plated L-shaped stereo mini plug) (1) * IEC = International Electrotechnical Commission.
About foamed silicone earbuds
Supplied foamed silicone earbuds provide a snug fit for effective attenuation of ambient noise
Notes
- Prolonged use of snugly fitting earbuds may strain your ears. If you experience discomfort, discontinue use.
- The foamed silicone portion of the earbuds is very fragile. If it is damaged, the earbuds may not sit correctly in your ears, and noise isolation may be affected.
- The foamed silicone may deteriorate or harden over time, and noise isolation may be affected.
- Do not subject the foamed silicone portion to pressure over long periods, as it may cause deformation
Removing the headphones
After use, remove the headphones slowly.
Note
Headphones are designed to fit closely in your ears. If the headphones are pressed hard while in use or taken off too quickly, they may cause injury. Wearing headphones may produce a diaphragm click sound. This is not a malfunction.
Precautions
- High volume may affect your hearing. For traffic safety, do not use while driving or cycling
- Install the earbuds firmly. If an earbud accidentally detaches and is left in your ear, it may cause injury
- Keep earbuds clean. To clean the earbuds, wash them with a mild detergent solution.
Do not leave the stereo headphones in a location subject to direct sunlight, heat or moisture.
Note on static electricity
Static electricity accumulated in the body may cause mild tingling in your ears. To minimize the effect, wear clothes made from natural materials.
