Protoarc XL98 Three Mode Mechanical Gaming Keyboard User Manual
Function overview of the keyboard
Wired connection
Note:
In TYPE-C wired mode, the “ON/OFF” switch has no function.
2.4G wireless connection
Type – C USB connector using method
During the 2.4GHz usage, there may be latency caused by external signal interference, which can be reduced by using a Type-C to USB adapter to minimize the interference.
- Insert the USB end of the cable into the USB port of the computer
- Insert the Type-C end of the cable into the Type-C port of the adapter
- Plug the USB receiver into the USB port of the adapter
- Place the USB receiver close to the keyboard to minimize interference
Bluetooth connection
- Turn the power switch to ON
- Switch to BT mode
Note:
- Windows 7 and earlier versions of the operating system do not support Bluetooth 5.0;
- The device number for Bluetooth 3.0 is XL98 BT3.0, while the device number for Bluetooth 5.0 is XL98 BT5.0.
- LED matrix panel displays “BT1 Unlinking”, long press Fn + Q key about 3 to 5 seconds, The indicator light below will flash rapidly, LED matrix panel displays “BT1 Pairing
- Turn on the Bluetooth of your computer or other devices, search and select “XL98 BT3.0” or “XL98 BT5.0” and start Bluetooth pairing. LED matrix panel displays “BT1 Connected”, indicating a successful connection.
Note:
- Windows 7 and earlier versions of the operating system do not support Bluetooth 5.0;
- The device number for Bluetooth 3.0 is XL98 BT3.0, while the device number for Bluetooth 5.0 is XL98 BT5.0.
Keyboard Mode Switching
- Mode channel: The keyboard has 5 channels, BT1, BT2, BT3, 2.4G, wired, and 5 devices can be connected at the same time
- Mode rotary knob: Turn the mode rotary knob between Wired/2.4G/BT. Press Fn + Q, W or E to switch between different Bluetooth channels of BT1, BT2 and BT3
iOS/Mac/Win layout switching
Short press to switch system layout
Note: The default setting is Windows layout.
LED Matrix Panel:
Switch the keyboard mode to wired mode, install the driver, and launch the software. Then, enter the “screen mode” in “Sketchpad” section to choose the LED matrix panel lighting effects or other modes.
- Adjust screen time: Display date and time
- Custom animation:
Character animation - Select “Screen Customization” in “Screen mode”
- Input your custom characters, such as “I LOVE YOU”. Note: The character count should be within 13 characters
- Click “Confirm”
- Select “Right Shift” in Options
- Select “Flowing Light” in Options 2
- “Upload file”
- “Upload current frame”
Now, the LED matrix panel will display your custom animation.
Switch between Custom Animation and Time Display by pressing FN+Left Ctrl
Self-made Animation
- Select “Screen Customization” in the Screen Mode
- Select “Brush Tool” in “Paint tools. Note: The eraser can be used to make changes.
- Create the first frame of animation using the “Brush Tool.”
- Click “Add one frame.”
- Create the second frame of animation.
- Repeat “Add one frame” to create the third frame of animation.
- Repeat “Add one frame” to create the fourth frame of animation.
- Select “Right Shift” in Options.
- Select “Flowing Light” in Options 2.
- Click “Upload GIF.”
Now, the LED matrix panel will display your self-made animation.
Switch between Custom Animation and Time Display by pressing FN+Left Ctrl.
Charging guide:
- When the charging cable’s Type-C interface is plugged into the keyboard and the USB interface is connected to your computer, the charging process begins, and the light stays red continuously.
- When the charging is complete, the light turns green.
Notice:
During the charging process, all modes are not controlled by the “ON/OFF” switch and are directly powered by the charging cable.
Custom driver
For custom mode please go to the following URL to download official driver. https://www.protoarc.com
Note: The driver can only be used in wired and 2.4G mode.
Technical specifications
- Connection methods: Wired / 2.4GHz / Bluetooth 3.0 / Bluetooth 5.0
- Wireless range: 2.4GHz(49ft/15 meters), Bluetooth(33ft/10 meters)
- Current and voltage: 5V = 500mA (max)
- Keyboard keys: 98
- Keycap material: PBT
- Mechanical switch lifespan: 100 million times
- Lithium battery capacity: 8000mAh
- Keyboard size: 15.6″× 6.8″x 1.4″
- Weight: 3.96lbs
System requirement
- 1 x USB port
- Bluetooth 3.0/Bluetooth 5.0
- Windows* 7,Windows* 8,Windows 10 or later, Android 3.2 and above: Mac OS 10.5 or later
Note: Multimedia functions are partially invalid in different OS versions.
Trouble shooting
- Ensure that the product’s USB wireless receiver is properly inserted into the computer’s USB port.
- Ensure that your computer meets the minimum system requirements.
- If the product and the wireless receiver are beyond the effective connection distance, please reduce the distance between the product and the receiver.
Attention
- For cleaning, please use dry, soft cotton fabric, etc.
- Do not fold or bend the product.
- Do not forcefully disassemble the product.
- Avoid getting the product wet, exposed to direct sunlight, or near open flames.
- Do not directly rinse with water.
- The keyboard is designed to be charged with a rated voltage of 5V based on the USB protocol. Please use the computer’s USB interface for charging and avoid using a charger to charge the keyboard.
- During use, prevent liquids from entering the internal components, as this may cause short circuits and electrical malfunctions.
Change the switches
Important safety and compliance information
Waste Electrical and Electronic Equipment-WEEE This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling or waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resource and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop of your waste equipment for recycling, please contact the local city office, the household waste disposal service or the shop where you purchased the product.
CE Declaration of Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive (2014/30/EU), RoHS directive (2011/65/EU) and Radio Equipment Directive (2014/53/EU)( for Radio Equipment ) This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards published under Directives of Official Journal of the European Union.
Federal Communications Commission (FCC) Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE – CAUSING EQUIPMENT REGULATIONS.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including
DOWNLOAD PDF LINK
