Anker Y1811 3-in-1 Cube with MagSafe User Manual
Important Safety Instructions
Please refer to the electrical and safety information on the bottom before installing or operating the product.
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during use of this product must not exceed 40°C.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
Specifications
| Input | 100-240V~50/60HZ 1.0A |
| Output | 5.0V 3.0A / 9.0V 3.0A / 12.0V 2.5A / 15.0V 2.0A / 20.0V 1.5A |
| Average Active Efficiency | 85.67% |
| Efficiency at Low Load (10%) | 84.17% |
| No-Load Power Consumption | 0.04W |
Wireless Charger
| Input | 12.0V 2.5A / 15.0V 2.0A / 20.0V 1.5A |
|
Output | Wireless: 5W/7.5W/15W(for iPhone) 5W Max (for Apple Watch) 5W Max(for AirPods) |
| Operating Temperature | 0°C – 40°C |
|
Radiated H-Field | EU / UK Only: -20.70dBuA/m@10m (for iPhone) -25.60dBuA/m@10m (for Apple Watch) -14.18dBuA/m @10m (for AirPods) |
|
TX/RX Frequency Range | EU / UK Only: For iPhone: 359.20-361.60kHz For Apple Watch: 324.80-327.20kHz For AirPods: 139.20-141.60KHz |
| LED indicator Status | Status |
| Solid white light up for 3s | Connected to power |
| Solid white | Charging (Airpods only) |
| Solid orange | Metal objects detected while charging. |
|
Flashing Orange | Over-voltage or under-voltage protection is activated. An incompatible AC adapter may be connected. Please use a Power Delivery adapter that meets the requirements. |
- This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
- Connect the wireless charger to a Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
- Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards, or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
- Wireless charging products make charging more convenient than wired chargers but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- (1) Reorient or relocate the receiving antenna.
- (2) Increase the separation between the equipment and receiver.
- (3) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- (4) Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 (800) 988 79733 This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
FCC RF Exposure Statement
This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the product and your body. Product Name: Anker 3-in-1 Cube with MagSafe Model: Y1811 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973
REFERENCE LINK
https://www.anker.com/products/y1811
DOWNLOAD LINK
