GOODEE YG600 LCD Home Theater Projector User Manual
Safety Notice:
- Please read the Manual carefully before you use the projector.
- To ensure a stable power supply, please use a national standard power cable and power cord with grounding.
- Please use the same power voltage as the projector marked.
- Please do not open the projector, otherwise, the supplier will not afford warranty service.
- Do not look directly at the projector lens while the machine is working to avoid damaging your eyes.
- To avoid clogging the projector vent, please do not cover it with cloth, carpet, or other materials.
- This projector does not have a waterproof function, please keep it away from rain, moisture, and other items containing liquid such as vases, cups, etc.
- To prevent power breakdown, please keep the projector away from rain water, or moisture.
- Turn off and cut off the power supply if do not use this project for a long time.
- Use the original foam or other unit-shock material to protect the projector. if vou need transport this proiector
Maintain Indication:
1-year warranty from the factory, for more warranty information, please contact with supplier (warranty service does not include the frame, manual, package, and some subjective idea about the video,
Interface Introduction
- Lens
- Manual focus
- Keystone
- UP
- Left
- Down
- Right
- OK
- Menu
- Signal Source
- Return
- Power switch
- VGA
- HD input slot 1
- HD input slot 2
- 5V-OUT
- USB input slot
- AV input slot
- 9 Earphone slot
- MicroSD card slot
- Power switch
- Power input
Remote Control Introduction
Pairing instructions:
- Press volume “+” and “-” at the same time, and the indicator light blinks for 3 seconds, remote control is paired.
- If pairing is successful, the indicator light continuously flashes 3 times and then extinguishes.
- If pairing still fails for 1-minute pairing, exit pairing mode, indicator light extinguishes, follow the steps above to pair again * The control should be close to the projector.
*NOTE:
- To avoid power shortage, please do not mix and use the old and new batteries.
- To avoid battery leakage corrosion, if do not use remote control for a long time, please take the battery out.
Preparation before light on
As in the following picture, connect the power adaptor.
Power on/Power off
To start the projector, press the power button 21 “-“, and press ” 
” button.
Boot screen
As the projector starts working after the screen displays 2 to 5 seconds of boot screen, then into the multimedia screen
Focus & keystone
keystone
Sometimes, the images on which projector on the wall are a little twisted as a ladder, we could take a keystone button” 3″ to adjust it. the keystone technology is the method to get the image normalization by digital or optical technology.
Solution
Our projector provides an optical keystone function, you can turn the keystone to adjust the image.
Image focus
Put the projector vertically to the projector screen or white wall, adjust the keystone”2″ , until enough, then the focus is finished. during the focusing, you could display a video of the menu to check the focus adjustment.
Solution
Our projector has no level keystone function, and if have this problem, the reason is you haven’t kept the projector vertical with the projector screen. the solution is to adjust the projector’s position and keep the projector on the same level.
Proiector connection introduce
Connection introduce
Multi-media connection
Insert the USB/MicroSD card into the accordingly slot. (refer to the picture below)
Choose a multi-media signal source.
Multimedia Supported format
Choose the content that you need to display: Video, Music, Photo Text
Choose the file that you want to display, press ” 
DIl ” display or stop.
AV Video Equipment Connect
Use 3 in 1 cable video convert cable, connect the projector AV slot, the connect method like the picture, as connected, choose the signal source video.
HD Equipment Connect
HD slot could connect to the computer and all the devices with HD slot. As connected, choose the source HD
Support files: 576P, 480P, 720P, 1080P, 640*480, 800*600, 1024*768, 1280*1024, 1280*720, 1440*900, 1920*1080, 1366*768, 1280*800, 1440*960, 1600*1200, 1680*1050 5.4.2 Our projector support HD slot and MHL cable. Use them to connect your mobile and tablet to the projector.
3.5mm Audio Device Connect
Could connect 3.5mm earphones and speaker equipment.
Notice:
Due to Dolby copyright, this projector does not support Dolby-related decode.
Lifting way
Remove the foot pads you will see the screw holes.
Adjust foot pads
Lift the projector and press the “PUSH” button to adjust the high-low foot pads.
Dust removal from Anti-dust Mesh
To keep the air circulating, please remove the air inlet regularly to clean the dust. Note, for your safety, pls shut the power off before operation.
Menu guides
Menu setting
Remote control use guide: press ” 
” key, then the main menu come out. Press ” 
” key, choose to come into the image submenu. Press “
” key, choose the program which you want to adjust. Then press “OK” key come into setting.
In the image, you could set the following models, such as image mode (standard ,soft, user,dynamic), color temperature (cold hot, user standard), zoom mode (auto, 4:3, 16:9, point-to-point, panoramic, zoom1, zoom2, just scan), de-noise (close, low, middle, high, tacitly approve).
Audio Sub-menu
Press” ” key, and then get the main menu. Press the”“” key, and choose the audio submenu. Press ” ” key, and choose the items that you want to adjust. Then press the “OK” key to come into the setting.
Display Menu Use Guide
You can control the content by the display menu.
In the setting, you can set the language in the menu language set, back to the factory setting, and upgrade the software.
Technology Features
Basic parameters
Projector distance & size
