Logitech Z407 Bluetooth PC Speaker User Manual
KNOW YOUR PRODUCT
BOX CONTENT
- Left satellite
- Right satellite
- Subwoofer
- Wireless control dial
- 2 AAA batteries
- Satellite stands
- 3.5 mm cable
- User documentation
CONNECT THE SPEAKERS
Place the stands on each satellite separately. Lay the speakers vertically or horizontally as per your preference. Make sure that the stands fit tightly in the speakers.
- Plug the right satellite cable into the blue subwoofer jack.
- Plug the left satellite cable into the gray subwoofer jack.
Plug the power cord into an electrical outlet. You will hear a welcome notification sound.
CONNECT THE SPEAKERS (CONT’D)
Long press and push downwards to open the back lid, and place two AAA batteries in the corresponding space.
The LED indicator will then start blinking in blue. Once the wireless control dial is successfully connected to the speaker, the LED will turn into a steady blue light.
CONNECT TO AUDIO SOURCE
The LED on the control dial will change correspondingly when connected to different connectivity.
- The LED will turn blue when connected via Bluetooth.
- The LED will turn purple when connected via 3.5 mm.
- The LED will turn white when connected via USB.
CONNECT VIA BLUETOOTH®
Make sure Bluetooth® is activated on the source device.
- Press and hold (2sec.) the Bluetooth® button on the bottom of the dial to activate pairing mode.
- The LED indicator will blink quickly. You will start to hear a pairing sound notification.
Select and connect to “Logi Z407” on your Bluetooth® device list. You will hear a connected tone. The LED will turn into a steady blue light.
CONNECT VIA A 3.5MM CABLE
Connect one end of the provided 3.5 mm cable to the auxiliary input on the back of the subwoofer. Then connect the other end of the cable to the 3.5 mm audio jack on your device.
The default connectivity is Bluetooth®. To play through 3.5 mm connectivity, press the wired input button on the back of the dial. The LED light will turn purple.
CONNECT VIA USB CABLE
Connect one end of the USB cable to the micro USB input on the back of the subwoofer. Then connect the other end of the cable to the USB-A input on your device.
NOTE: A USB cable is not included in the box and must be purchased separately.
The default connectivity is Bluetooth®. To play through USB connectivity, press the wired input button on the back of the dial. The LED light will turn white.
CONNECT TO THREE DEVICES SIMULTANEOUSLY
Connect up to three devices at the same time through the micro USB input, 3.5 mm input on the back of the subwoofer, and Bluetooth®.
SWITCH BETWEEN DIFFERENT AUDIO SOURCES SWITCH BETWEEN TWO WIRED CONNECTIVITY To switch between wired connections (3.5 mm and USB), press the wired input button on the bottom of the dial. The LED color will change correspondingly.
SWITCH BETWEEN WIRED AND WIRELESS CONNECTIVITY To switch from a wired connection to a wireless connection (Bluetooth®), press the Bluetooth® button on the bottom of the dial.
You can pair up to eight Bluetooth® source devices with your speakers. To switch between wired and wireless audio sources, press the Bluetooth® button and the wired input button on the back of the wireless control dial.
CONTROL YOUR AUDIO CONTENT
ADJUST THE VOLUME
- To adjust the volume of the speaker, rotate the wireless dial control clockwise (counterclockwise) to increase (decrease) the volume.
- When reaching MAX volume, you will hear a notification tone.
ADJUST THE BASS
- To adjust the bass level, long press the dial for 2 sec. and enter bass mode, you will hear a notification sound. Rotate clockwise (counterclockwise) to increase (decrease) the bass volume.
- Long press 2 sec. to exit bass mode, and you will hear an exit notification sound.
- If you did not exit bass mode after adjusting the bass, the system will automatically change back to volume mode after 15 seconds without using it.
- You will hear a notification sound when you reach Max and Min bass levels.
PLAY / PAUSE (MUTE/ UNMUTE)
- Press once on the dial to play/pause (mute/ unmute) your audio content.
- Play/pause (Mute/ unmute) will only be activated when the speaker is connected via Bluetooth® or USB input (3.5 mm).
SKIP
- Press twice on the dial to skip your current track.
- Skip will only be activated when the speaker is connected via Bluetooth® or USB input.
REWIND
- Triple-press the dial to replay the soundtrack.
- Rewind will only be activated when the speaker is connected via Bluetooth® or USB input.
REFERENCE LINK
https://www.logitech.com/nl-be/products/speakers/z407-bluetooth-computer-speakers.html
