TREBLAB Z7 PRO Hybrid Active Noise Cancelling Headphones User Manual

TREBLAB Z7 PRO Hybrid Active Noise Cancelling Headphones User Manual

SAFETY RULES

1. Don’t disassemble or modify your headphones for any reason. Doing this may cause the headphones to malfunction or become combustible. The damage to your device can void your manufacturer’s warranty.
2.  Do not let your device get wet – liquids can cause serious damage. Damage to your device caused by water can void your manufacturer’s warranty.
3.  Make sure the headset is completely dry before charging.
4.  Avoid exposing the TREBLAB Z7 Pro to extreme temperatures (below 37°F 13°C or above 112°F / 45°C). Extreme temperatures can cause the deformation of the Z7 Pro components, reduce the battery life and the lifespan of your new headset.
5.  Don’t put the device’s LED lights close to humans’ or animals’ eyes Do not use your Z7 Pro during a thunderstorm. Thunderstorms can cause serious malfunction and increase the risk of electric shock.

IN THE BOX

1. TREBLAB Z7 Pro headphones
2.  User’s manual
3.  Round TREBLAB sticker
4. Carrying case
5. Charging USB Type-C cable
6.  3.5 mm audio cable

Over-Ear Headphones

The over-ear headphones with Bluetooth® 5.0 Aptx™ HD and Hybrid Active Noise Cancellation technology provide superior sound quality and the convenience of hands-free operation

TOUCH PANEL

RIGHT SIDE:

SETTING UP YOUR TREBLAB Z7 Pro

Turn ON
Press the POWER button for 3 sec. You will hear the sound prompt and, a few seconds later, the “Bluetooth pairing on” voice prompt. The LED on the right earcup will turn blue and then will start flashing blue/red. In case the headphones have been previously connected to the smart device, instead of “Bluetooth pairing on”, you will hear the “Connected” voice prompt and the LED will start flashing blue/green slowly.

Turn off
Press and hold the POWER button for 4 sec. You will hear the “Power off” voice prompt. The blue LED will light up for a second and will go off.

PAIRING

1. Make sure the TREBLAB Z7 Pro are charged and the 3.5 mm audio cable is not plugged in.
2. Press the POWER button for 3 sec. You will hear the sound prompt and, a few seconds later, the “Bluetooth pairing on” voice prompt. The LED on the right earcup will turn blue and then start flashing blue/red indicating that Z7 Pro are in the pairing mode.
3. Activate the Bluetooth option on your smart device and keep it within 3 feet/1 meter from the TREBLAB Z7 Pro
   while pairing.
4. Scan/search for available devices in your smart device.
5. Select TREBLAB Z7 Pro from the device list.
6. If the password is prompted, enter “0000”. Once the Z7 Pro are successfully paired and connected, you will hear the “Connected” voice prompt, and the LED will start flashing blue/green slowly.

MULTIPOINT CONNECTION

The TREBLAB Z7 Pro headphones have a multipoint connection. It allows two devices to be connected at the same time. While you won’t receive the input from both devices at the same time, you’ll be able to switch from one device to another seamlessly. To connect the Z7 Pro to the second device:

1. Switch off temporarily the wireless mode on the first device the headphones are connected to.
2. Repeat pairing steps 2-6 to connect the second device.
3. Turn on the Bluetooth mode back for the first device and connect the Z7 Pro again.
4. When you turn the headphones on, they will try to reconnect to the recently connected device/devices. If the reconnection does not happen automatically, the headphones will try to find the next device in the pairing list.

MODES

ANC/AMBIENT SOUND MODES
The TREBLAB Z7 Pro headphones feature Hybrid Active Noise Cancellation technology. This technology provides the ability not only to decrease the surrounding noise in the ANC mode but also to amplify some frequencies in the Ambient Sound mode to hear voices when using the Z7 Pro headphones. When the Z7 Pro are turned on, the ANC mode is enabled automatically. In the ANC mode the green LED on the right earcup is lit up. To switch to the Ambient Sound mode, press the ANC button once. You will hear the “Ambient sound” voice prompt and the LED on the right earcup will change to white. To disable both ANC and Ambient Sound modes, press the ANC button once again. You will hear the “Ambient sound and noise cancelling off” voice prompt and the white LED light on the right earcup will go off.

AWARENESS MODE
When you listen to music and some person approaches you to talk, you can fastly lower the music volume to the minimum and activate the Ambient Sound feature to keep the conversation going. To do so, cover the right earcup with a palm. Once you release the earcup, the music will go back to the previous volume level and the Ambient Sound feature will be disabled.

AUX LINE-IN CONNECTION

You can connect the TREBLAB Z7 Pro to compatible devices using the supplied 3.5 mm audio cable. Plug one end of the 3.5 mm audio cable into the AUX LINE-IN port on the right earphone and plug the other end into the AUX
LINE-IN port on your device. In the AUX mode, you can also use the ANC/Ambient sound features + adjust the volume. To do so, turn on the headphones by pressing and holding the POWER button for 3 sec. Keep in mind that in such case the inbuilt battery will still be drained.

NOTE:
NEXT, PREVIOUS, PLAY/PAUSE controls are not supported in the AUX mode. You will need to make these adjustments using your smart device.

AUDIO PLAYBACK

The TREBLAB Z7 Pro headphones are equipped with a highly responsive Touch panel on the right earcup. To adjust the volume, swipe up on the Touch panel to raise the volume and swipe down to lower the volume. To change tracks on the Z7 Pro headphones, swipe forward on the Touch panel to play the next track and swipe backward to play the previous track.

PHONE CALLS

The TREBLAB Z7 Pro have 2 dedicated microphones and support ENC (Environmental Noise Cancelling) technology to provide the best calling experience. Audio playback will be paused during the calls.

NOTE: When you are on a call and the second one is incoming, you can accept it but in such case the first call will be hung up.

VOICE ASSISTANT ACTIVATION
The TREBLAB Z7 Pro headphones support the voice assistant activation command. To use any of the voice assistants (SIRI®, Google Voice Assistant® and others).

CHARGING AND BATTERY

One full battery charge provides up to 45 hours of playtime with ANC disabled and up to 30 hours with the ANC function activated.  You will hear the voice prompt saying the current percentage of the battery left. When the battery is running low, you will hear the “Battery Low” voice prompt. To charge the headphones, plug the supplied charging cable into the Type-C charging port on the left earcup and the other end of the charging cord into a standard USB port. The LED light will turn RED. It takes up to 2.5 hours to fully charge the Z7 Pro.  Be sure to use a 5V DC, 1A adapter or charger.

RESET TO THE FACTORY SETTINGS

You can reset the Z7 Pro headphones to the factory default settings by cleaning up the pairing list with the last connected to Z7 Pro devices. Turn on the TREBLAB Z7 Pro headphones. Press and hold the Bluetooth button for 5 seconds. You will hear the “Factory reset compete” and “Bluetooth pairing on” voice prompts.

TROUBLESHOOTING

SPECIFICATIONS

• Battery: Up to 45 hours play-time without ANC
• Charging time: Up to 2.5 hours
• ANC type: Hybrid (4 microphones)
• Calling: 2 microphone with ENC technology
• Voice assistant activation: Supported by tapping on the touch panel and holding for 3 sec.
• Bluetooth version:  BT5.0
• Profiles: A2DP, AVRCP, HFP, HSP, SPP, GATT, HOGP, PBAP
• Audio playback support: Qualcomm® aptX™ HD, AAC, SBC.
• Signal Range: 33ft/10m
• Frequency response: 20Hz – 20KHz
• Charging port: Type-C
• Dimensions: 200 x 165 x 80mm / 7.87 x 6.5 x 3.14 in
• Weight: 244g / 8.60OZ / 0.53lb

REFERENCE LINK

https://treblab.com/