Veho ZB-7 Wireless Noise Cancelling Headphones User Guide
Guide to the headphones
- Power button
- Power status LED
- Microphone
- 2.5mm audio port
- Active noise cancelling
- Active noise cancelling LED
- Volume + / Next track
- Volume – / Previous track
- USB-C charging port
- Charging status LED
Charging
Charging the headphones Connect the supplied USB-C cable to the headphones and then into a compatible 5V⎓1A power source. The status LED will show solid red when charging, turning blue when fully charged. When the battery is low, a warning tone will sound every 3 minutes.
Pairing
Pairing with a device Ensure the headphones are off. Press and hold the power button for 5 seconds, and wait until a ‘Pairing’ tone sounds and the power status LED flashes red/blue. Select ‘Veho ZB-7’ from the Bluetooth® menu on your device.
Line-in cable
Using the Line-in cable Connect the supplied 2.5mm audio cable from the headphone audio port to your device. The headphones will default to line-in mode whilst the audio cable is connected.
Functions
Power on/off Press and hold the power button for 3 seconds to turn on, the power status LED will flash blue. Press and hold the power button for another 3 seconds to turn off, the power status LED will flash red.
Play/pause Press the power button once to play and once again to pause.
Volume up/Next track Press the (+) button for 2 seconds to skip to the next track. Press once to increase the volume.
Volume down/Previous track Press and hold the (-) button for 2 seconds to skip to the previous track. Press once to reduce the volume.
Voice assistant Simultaneously press and hold the volume + and volume – buttons for 2 seconds.
Active Noise Cancelling (ANC) Press the ANC button once to change modes between on/off/ambient mode. Active Noise Cancellation uses the microphone and speakers to reduce background and surrounding noises.
Bass control Press and hold the ANC button for 2 seconds to change modes between bass up/normal.
Multipoint connection Pair the headphones to a Bluetooth® device, disable Bluetooth® on this device and repeat pairing instructions with a second device. Multipoint connection allows the headphones to maintain simultaneous connections with two source devices.
Reset Ensure the headphones are disconnected from devices. Simultaneously press and hold the power and volume – buttons for 5 seconds.
Answering/ending calls Press the power button once to answer an incoming call. Press once again to end the call.
Rejecting calls Press and hold the power button for 2 seconds to reject an incoming call.
Call mute/unmute Press and hold the volume + button for 3 seconds.
Call switch Simultaneously press and hold the volume + and volume – buttons for 2 seconds during a call to switch between the headphones and mobile device.
Number redial Double click the power button to redial the most recent contact on your call log.
Specifications
Support
Should you need to contact Veho for support or troubleshooting for your ZB-7 Headphones, please contact us via our chat box on our website at: veho-world.com
DOWNLOAD PDF LINK
https://veho-world.com/product-category/z-series-headphones/
