Morecam ZY-E6 2K Floodlight Security Camera User Manual
Packing List
- Floodlight Camera * 1
- Quick User Guide *1
- Screws Set for camera * 3
- Solar Panel with Cable *1
- USB Cable *1
- Screws Set for Solar Panel * 3
NOTE: Micro SD card and power adapter are not included.
Product Appearance
Power Button
Reset Button
SD Card Slot
Charging Indicator
Status Light
USB Charge Port
Kee onsinger 10 seconds to
Preogu to ate for s seconds until hearing
Support local SD card storage (up to 128G)
Red means charging, blue means fully charged
Blink Slowly in Red: Awaiting Wi-Fi connection ready for adding devices
Blink Fast in Red: Wi-Fi connecting
Solid in Red: Network problem
Solid in Blue: Wi-Fi connected, camera running normally
Blink Slowly in Blue: Firmware update
Use 5V 2A adapter to charge this camera
Download App
The camera supports Android and iOS systems. Scan the QR code or search ‘Mubview’ in App store to download it. Follow the instruction to register an account.
Note: Must turn on both following two permissions.
- Allow Mubview App to access mobile cellular data and wireless LAN, otherwise it will fail to connect the camera.
- Allow Mubview App to receive notifications, otherwise, your phone will not receive alarm notification.
Account Registration
A new user needs to register account in App with an email address. Click ‘Sign up’ to register a new account.
Note:
- When register a new account, please choose the region you are actually in and fill in correct country code. (People registered in different regions can’t share the camera.)
- Please register with e-mail address.
Add Camera to App
Preparations for connection
- Before turn on the camera, insert a Micro SD Card to save video clips or you can start the 3-day free cloud service. Without Micro SD Card or cloud service, no video will be saved.
- Make sure your WiFi is 2.4GHz. The camera only works with 2.4GHz WiFi, not support 5GHz.
- Put the camera and your smart phone close (suggest 1-3 ft) to the router when connect Wifi.
Connect Camera to App
- Add camera to App: Home page – Right up corner ‘+’ – ‘ Battery Camera’
- Connect the camera to WiFi according to the steps in App.
Note:
- When connect camera to WiFi, make sure the indicator light is flashing slowly in red. If not, please reset the camera (hold the RESET button for 4-5 seconds until the light turns red and blinks.)
- If you can’t hear ‘Bugoo, please long-press the reset button to enter the configuration mode again.
- Make sure your accountant password is correct. ( the password of the WiFi cannot include single quote, underline, space and virgule /).
- In general, the router has connection limit. Once the devices number exceeds the limit, other devices will fail to connect to the router.
- After checking the above information, if the camera still cannot connect to Wifi, please re-download the App, reset the camera or restart the router, and then add the camera in App again.
- If you tried all the steps, but still no luck, please email us for support: http://support@mubview.com.
Camera Installation
- The camera should be placed 7-10 ft (2-3m) off the ground.
- Tilt the camera down at about a 15° angle.
- Keep the PIR lens level for best results.
- It is not suggested installing the camera vertically towards the moving objects, otherwise, it may not detect the motion events or cause delay. The camera motion sensor is much more sensitive for movement goes across the lens’s field of view rather than directly toward/away.
Note: To reduce false alarms, please note that:
- Better not point the camera to lights/glass/window/swimming pool.
- Do not point the camera too close to busy traffic.
- Keep camera away from outlets, including air conditioner vents, humidifier outlets, the heat transfer vents of the projectors, etc.
Floodlight
The light panel can provide brightness of up to 800 lumens. Brightness can be adjusted manually. Click once to turn on. Click again to turn off. The lighting duration can be manually set from 10 seconds to 10 minutes max. The light will automatically light up after camera being triggered by HUMAN in all black environment. Trigger distance is up to 10 meters.
Siren + Light Alarm
The camera can give audiable and light alarm, based on following conditions:
- All black enviroment
- Turn on “Linkage bazar” in “Alarm management” – “Motion Detection”|
- Turn on “Speaker” in ” Sound Settings”
Two-Way Audio
- Pes no moron ormonio at seven Ap.
- Release the intercom button to listen.
Alarm Management
Alarm area
The alarm area has 16*9 grids. Select the area you want to monitor. To set alarm area, enter camera setting page – “Alarm Management” – “Alarm Area”. You will only receive alarm notification that appears in the grid area.
Alarm Plan
You can set weekly/daily alarm schedule in alarm management. The camera will only be triggered and send alarm notification during your schedule period. You can set 4 alarm time periods at most.
Power Management
- Original rechargeable battery built in 13500mAh.
- Mubview Solar panel powered
- 5V 2A power adapter charge For a better weatherproof performance, always cover the USB charging port with the rubber stopper after charge the camera.
Solar Panel
Install Mubview solar panel where sun shines for most of a day and adjust the angle to make sure maximum exposure.
Multi Device Management
Mubview App can manage multiple Mubivew cameras or doorbells. You can watch live of 4 cameras at same time in the Apo.
Enter “Device Share” in camera setting page to share camera with others. Share steps:
- B download Mubview App and create his new account in App.
- Click ‘Add’ in App on A’s phone.
- A scan B’s QR Code or input B’s account ID directly.
- B accept share on his phone.
Storage and Encryption
Mubview security cameras have two storage methods:
- Micro SD card capacity up to 128G.
- Cloud: Mubview supplies with 3 days of free cloud storage. To continue to use the cloud service, you need to purchase this service. Choose the cloud space and time vou need. the video will not be lost.
REFRENCE LINK
