Table of contents
show
ZYF Z10 Anti Lost Smart Remote Control User Manual
Package Contains
- Remote control x 1
- USB Receiver x 1
- USB charging cable x 1
- Instruction Manual x 1
Product Overview
How to Use the ZYF Remote
- Select Device Mode: Press TV, DVD, or STB to choose the device you want to control.
- Use Navigation Keys: The arrow keys and OK button let you browse menus and select options.
- Control Volume and Channels: Use dedicated volume and channel buttons for quick access.
- Mute Button: Press to instantly silence your device.
Power Button: Use this to turn your device on or off.
Installation Guide
Step 1: Insert Batteries
Open the battery cover on the back.
Insert 2 AAA batteries, ensuring correct polarity.
Step 2: Choose Programming Method
Manual Code Entry
- Press and hold the device button (TV, DVD, etc.) until the LED stays on.
- Enter the 3-digit device code from the manual.
Auto Search
- Hold the device button + Power together until the LED starts blinking.
- Keep pressing the Power button until the device responds.
Press OK to save the code.
Step 3: Test the Remote
- Try basic functions like Power, Volume, and Channel.
- If it doesn’t work, try another code or repeat the auto search process.
Pairing Method
The remote control and USB receiver are already paired at the factory, so the receiver can be used directly after plugging it in If the remote control and the receiver cannot be paired due to mis operation or other reasons during use, you can connect by the following methods:
Button Layout and Functions
Understanding the button layout is key to efficient use. Here’s a breakdown:
- Power Button: Turns your device on/off.
- Device Selection Buttons (TV, DVD, STB): Used to switch control mode.
- Numeric Keypad (0–9): For channel input or code programming.
- Volume and Channel Controls: Adjust volume or switch channels.
- Mute: Instantly silences the audio.
- Navigation Arrows and OK Button: Navigate on-screen menus.
- Menu, Exit, and Guide Buttons: Access device settings, exit menus, and open TV guides.
Maintenance & Cleaning
Battery Care
- Remove batteries if you won’t use the remote for extended periods.
- Replace batteries when performance drops or LED becomes dim.
Cleaning Tips
- Use a soft, lint-free cloth slightly dampened with water to wipe the surface.
- Avoid using harsh chemicals or submerging the remote in liquid.
- Gently brush around buttons to remove dirt or crumbs.
Storage
- Store the remote in a dry area, away from direct sunlight or heat sources.
- Avoid dropping the remote to prevent internal damage.
Features
- Universal Compatibility: Works with most major brands of TVs, DVD players, and set-top boxes.
- Multi-Device Control: Easily switch between devices with dedicated buttons.
- LED Programming Indicator: Gives visual feedback during setup and programming.
- Ergonomic Design: Comfortable to hold, with soft rubber buttons for prolonged use.
- Energy Efficient: Designed to function for months with a single set of AAA batteries.
- Code Search Function: Automatically scans for the correct code if you don’t know your device’s specific code.
Memory Retention: Retains programmed codes even when batteries are removed temporarily.
Specifications
- Model: ZYF Universal Remote Control
- Compatible Devices: TV, DVD, STB, and other IR-controlled electronics
- Power Supply: 2 AAA batteries (1.5V each)
- Material: ABS plastic
- Signal Transmission: Infrared (IR)
- Range: Up to 8 meters
- Color: Standard Black with White Buttons
- Operating Temperature: 0°C to 45°C
- Storage Conditions: Keep in a cool, dry place
Troubleshooting Guide
No Response from Remote
- Solution: Replace batteries and ensure correct polarity.
- Check if LED blinks when buttons are pressed. If not, the batteries might be dead.
Device Not Responding to Commands
- Solution: Reprogram the remote using the correct 3-digit code or use auto search.
Incorrect Device Operates
- Solution: Clear current code and reprogram using manual method.
Remote Works for One Device But Not Others
- Solution: Ensure the correct mode (TV, DVD, STB) is selected before use.
Remote Range is Too Short
- Solution: Clean the IR lens and ensure there are no obstructions between remote and device.
FAQS
Why would a remote control stop working?
- Either a dead battery inside the remote, possibility of water damage, or faulty electronic components.
Why is my TV not turning on but the red light is on?
- A red light on a TV that won’t turn on usually means the TV is in standby mode, meaning it’s receiving power but isn’t actively displaying an image.
How to measure TV size?
- To determine a TV’s size, measure the diagonal distance across the screen, from one corner to the opposite corner.
How do TV backlights work?
- When an electric current passes through the liquid solution, it causes the crystals to align so that light is transmitted.
What is remote fault?
- Other side of the link reported a issue with this side of the link.
How do I enable Remote Play?
- To enable remote play on a PlayStation console (PS5 or PS4), you first need to download and install the PS Remote Play app on your mobile device or PC. Then, on your console, navigate to Settings > System > Remote Play and ensure it’s enabled.
How do I uninstall Remote Play?
- To uninstall PS Remote Play , go to your Windows PC settings and select Apps > Apps & features, and then delete PS Remote Play.
What is a remote reset?
- Remote power reset refers to the process of restarting electronic devices like computers, servers, switches, routers etc. remotely over a network connection.
What is a remote cause?
- A remote cause is something that happened a long time ago and didn’t directly cause the problem, but still played a part in it.
DOWNLOAD PDF
b74171cd76141d22ad73c22732a7d47c0684ca02cfac6d8ccbeb07af69d2e211_optim