Table of contents
show
Shark 2300 Matrix Robot Vacuum Quick Start Guide
Shark-2300-Matrix-Robot-Vacuum-IMG
Set Up Dock
- Remove any plastic wrap and foam from the
robot and base. - Place dock in a spot with a strong Wi-Fi signal.
- Dock LED will turn green when powered ON.
- Note: Check between the bumper and wheels to
ensure all protective materials are removed prior
to robot use.
Attach Side Brush
- Note: Side brush design may vary.
Place Robot on Dock
- Robot will turn on when properly placed on dock.
- Dock LED will turn blue when the robot is charging.
Scan the QR code to download the SharkClean® app.
- Complete your robot setup process in the app.
What’s Included:
Two Easy Steps If You’re Stuck:
- Visit the app or sharkclean.com/support
- Owner’s Guide • Troubleshooting
- How-To Videos • FAQs
- Tips & Tricks
- For additional help, please scan the QR code to visit the digital Instruction Booklet or call 1-888-228-5531 for robot support.
Maximize your Robot Experience:
Tips and tricks for getting the most out of your robot:
- To manually turn ON/OFF your robot, hold down the DOCK button for 5–7 seconds.
- Clear the area of cords and wires before each clean.
- Always place your robot on a level surface when performing maintenance.
- Clean brushroll, charging contacts, and filter regularly.
DOWNLOAD PDF
Shark 2300 Matrix Robot Vacuum Quick Start Guide
https://www.sharkclean.com/products/shark-matrix-self-emptying-robot-vacuum-zidRV2310AE
