Table of contents
show
Shark 2300S Matrix Robot Vacuum Quick Start Guide
Robot Setup:
Set up Self-Empty Base
- Remove any plastic wrap and foam from the robot and base.
- Place base in a location with a strong Wi-Fi signal.
- Dock LED will turn green when powered ON
- Note: Check between the bumper and wheels to ensure all protective materials are removed prior to robot use.
Attach Side Brush
- Note: Side brush design may vary.
Place Robot on Self-Empty Base
- Robot will turn on when properly placed on the dock.
- Dock LED will turn blue when the robot is charging.
Scan QR code to download the
- Shark Clean® app to complete robot setup.
What’s Included:
Two Easy Steps If You’re Stuck:
- Visit: sharkclean.com/support
- Owner’s Guide • Troubleshooting
- How-To Videos • FAQs
- Tips & Tricks
- For additional help, please scan the QR code to visit the digital Owner’s Guide or call 1-888-228-5531 for robot support
Maximize Your Robot Experience:
Tips and tricks for getting the most out of your robot.
- To manually turn ON/OFF your robot, hold down the DOCK button for 5–7 seconds.
- Clear the area of cords and wires before each clean.
- Always place your robot on a level surface when performing maintenance.
- Clean brushroll and filter regularly.
DOWNLOAD LINK
Shark 2300S Matrix Robot Vacuum Quick Start Guide
