HyperX ChargePlay Duo for PS5 User Manual
INSTRUCTION
The HyperX ChargePlay Duo is a charging station designed specifically for gaming controllers, including the PlayStation 5 (PS5) DualSense controller. It allows you to conveniently charge two controllers at the same time, ensuring they are always ready for your gaming sessions.
Here are some key features of the HyperX ChargePlay Duo for PS5:
- Dual Charging: The ChargePlay Duo can charge two PS5 controllers simultaneously, which is ideal if you have multiple controllers or if you frequently play with friends.
- Quick Charging: It supports fast charging, allowing your controllers to charge quickly and efficiently. This ensures you can get back to gaming in a shorter amount of time.
- LED Indicators: The charging station features LED indicators that provide visual feedback on the charging status of each controller. You can easily see if your controllers are fully charged or still in the process of charging.
- Secure Docking: The ChargePlay Duo provides a secure docking system that holds the controllers firmly in place during charging. This helps prevent accidental drops or damage to your controllers.
- Easy Setup: The charging station is designed for user convenience, with a simple plug-and-play setup. You just need to connect the charging dock to a power source, and you’re ready to charge your controllers.
It’s important to note that while the HyperX ChargePlay Duo is compatible with the PS5 DualSense controller, you should always check for compatibility and any specific requirements or recommendations from the manufacturer before purchasing a charging accessory for your gaming console.
Overview
- A Charging Port
- B USB-C Port
- A A C USB-C to USB-A Cable
Installation
Connect Charge Play Duo to PS5 using the supplied USB cable.
Setup
The PS5 system settings must be configured in order to use ChargePlay Duo while the console is in rest mode.
- Navigate to Settings > System > Power Saving > Features Available in Rest Mode > Supply Power to USB Ports
- Adjust the setting to supply power to the USB ports while the console is in rest mode.
Usage
The controller light bar will indicate charging status.
- Breathing—Charging
- Off—Fully charged
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try correct the interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Any special accessories needed for compliance must be specified in the instruction manual.
Warning:
A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
India RoHS Statement
This product, as well as its related consumables and spares, complies with the reduction in hazardous substances provisions of the “India E-waste (Management and Handling) Rule 2016.” It does not contain lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for where allowed pursuant to the exemptions set in Schedule 2 of the Rule.
Copyright 2022 HyperX and the HyperX logo are registered trademarks or trademarks of HP Inc. in the U.S. and/or other countries. All registered trademarks and trademarks are property of their respective owners.
/ HP Inc. 1501 Page Mill Road, Palo Alto, CA 94304, USA. HP, HQ-TRE, 71025 Boeblingen, Germany. HP Inc UK Ltd, Regulatory Enquiries, Earley West, 300 Thames Valley Park Drive, Reading, RG6 1PT.
FAQS
Q: What is the HyperX ChargePlay Duo for PS5?
A: The HyperX ChargePlay Duo for PS5 is a charging station designed specifically for the PlayStation 5 DualSense controllers. It allows you to charge two controllers simultaneously.
Q: How does the HyperX ChargePlay Duo work?
A: The ChargePlay Duo connects to a power source using the included USB Type-C cable. You can then place two DualSense controllers on the charging dock, and it will start charging them automatically.
Q: Does the HyperX ChargePlay Duo require any additional power source?
A: Yes, the ChargePlay Duo needs to be connected to a power source using the provided USB Type-C cable. You can connect it to a USB port on your PS5 console or any other USB power adapter.
Q: Can I charge my DualSense controllers without removing their protective cases?
A: The HyperX ChargePlay Duo is designed to accommodate the DualSense controllers without any protective cases. If your controllers have thick cases, you may need to remove them before placing them on the charging dock.
Q: How long does it take to charge the DualSense controllers using the ChargePlay Duo?
A: The charging time may vary depending on the battery level of your controllers. On average, it takes around 2-3 hours to fully charge a DualSense controller using the ChargePlay Duo.
REFERENCE LINK
https://www.hyperxgaming.com/us/power/chargeplay-base-qi-wireless-charger
