Hisense Soundbar with Wireless Subwoofer Quick Start Guide

Table of contents show

Hisense Soundbar with Wireless Subwoofer Quick Start Guide

Hisense-Soundbar-with-Wireless-Subwoofer-img

Hisense-Soundbar-with-Wireless-Subwoofer-Fig1

Remote Control

Switch the unit between ON and STANDBY mode.
Select the play function.
Adjust the surround ON/OFF.
Select the Bluetooth mode. Press and hold the button to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device.
Select a preset sound effect.
Skip to previous/next track in BT / USB mode.
Increase/decrease the volume level.
Play/pause/resume playback in BT / USB mode. Press and hold the button for 3s to enter setup menu. Confirm a selection.
BASS+/- Adjust bass level.
TREBLE+/- Adjust treble level.
DIMMER+/- Adjust display brightness.
(MUTE) Mute or resume the sound.

Hisense-Soundbar-with-Wireless-Subwoofer-Fig14

Replace the Remote Control Battery

Press and slide the back cover to open the battery compartment of the remote control.
Insert two AAA size batteries (included). Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment.
Close the battery compartment cover.

Hisense-Soundbar-with-Wireless-Subwoofer-Fig15

Do not mix old and new batteries;
Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Ni-Cd, Ni- MH, etc.) batteries.

Identifying the Parts

Hisense-Soundbar-with-Wireless-Subwoofer-Fig18

Main Unit

(ON/OFF) button Switch the unit between ON and Standby mode.
(SOURCE) button Select the play function.
VOL+/VOL- buttons Increase/decrease the volume level.
Display Window Show the current status.
Remote Control Sensor Receive signal from the remote control.
Screws Remove the screws then install the wall mounting screws into the back of the unit.
USB Socket Insert the USB device to play music.
TYPE-C Socket For the Dongle of wireless rear surround speaker. The surround kit needs to be purchased separately. This port can’t be used to connect to other Type C devices.
OPTICAL Socket Use to connect to the OPTICAL OUT socket on an external device.
COAXIAL Socket Use to connect to the COAXIAL OUT socket on an external device.
HDMI OUT (TV eARC/ARC) Socket The port for connecting a TV. The port supports the eARC/ARC HDMI feature, which allows the soundbar to play audio that originates on the connected TV.
HDMI IN (1/2) Sockets Two HDMI ports for connecting HDMI source devices, such as a DVD player, Blu-ray Disc™ player, or gaming console. Note that only one HDMI input is usable at a time.
AC~ Socket Connect to power supply.

Hisense-Soundbar-with-Wireless-Subwoofer-Fig23

Wireless Subwoofer

AC~ Socket Connect to power supply.
PAIR button Press activate the pairing function between the main unit and the subwoofer.
PAIR Indicator Light stops blinking once the Subwoofer is paired with the Sound bar.

Connections

Hisense-Soundbar-with-Wireless-Subwoofer-Fig24

Pair up with the subwoofer

The subwoofer and the soundbar will be paired automatically when both are powered on. If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer.

Hisense-Soundbar-with-Wireless-Subwoofer-Fig25

Bluetooth Operation

Hisense-Soundbar-with-Wireless-Subwoofer-Fig27

Setup Menu

During ON mode, press and hold the button for 3 seconds to open the menu.
Select the content with buttons.
Change the initial values for each of the settings with VOL +/- buttons.
Press the button to confirm your selection and exit the settings.
If no button is pressed within 15 seconds, the system will automatically exit the menu.