Table of contents
show
Shark Pro Steam Pocket Mop Owner Guide
QUICK START GUIDE
WHAT’S INSIDE
- Mop Handle
- Mop Body
- Mop Head
- ( 1) 6mm x 54mm Large Screw
- (2) Dirt Grip™ Pocket Pads
- Filling Flask
ASSEMBLY
- Screw the Mop handle into the Mop Body (screwdriver not included).
- Secure the Mop Head inside the Dirt Grip Pocket Pad.
- Snap the Steam Mop Body onto the post on the Mop Head.
FILLING THE WATER TANK
- Remove the water tank cap by turning it counterclockwise.
- Use the filling flask and pour water into the tank. Do not overfill. Replace the cap on the water tank, and turn clockwise to lock.
USING THE PRO STEAM POCKET MOP
- Plug the power cord into an electrical outlet. The STEAM CONTROL BUTTON will flash blue. Press the button to select your steam setting: once for DUST; twice for MOP; and three times for SCRUB. Pressing a fourth time will place the unit on standby.
- Wait 30 seconds for the unit to begin producing steam. Start mopping on an appropriate sealed hard- floor surface with a forward and backward motion.
- When one side of the Dirt Grip Pocket Pad gets dirty, simply flip the mop over to use the other side of the pad.
INTELLIGENT STEAM CONTROL
AFTER USE AND STORAGE
- When you have finished using the Pro Steam Pocket® Mop, press the Steam Control button until the LED light turns flashing BLUE. This stops the unit from steaming. Unplug the cord from the outlet and place the Steam Mop in the upright position. Let the unit cool for 2-3 minutes.
- Remove the Dirt Grip™ Pocket Pad by releasing the quick fasteners and using the loop on the side of the pad, avoiding contact with the hot pad.
- To store the Shark® Pro Steam Pocket® Mop hanging up, first remove the head (after it has cooled and the steam has been released), then hang on a large hook (not included). Empty the water tank before storing the Pro Steam Pocket Mop for an extended period.
CLEANING THE PAD
- Wash pads in warm water. Wash separately from other laundry. Only use liquid detergent. (no powder detergent) Don’t use any fabric softeners. Line dry or dry on a low dryer setting.
TROUBLESHOOTING
