Pyleaudio PT796BT Receiver Manual

Pyle audio PT796BT Receiver Manual

Safety Precautions

1. Avoid opening the cover or back panel. Do not open the cover, fix or touch the inner parts. No user-serviceable parts inside, refer servicing to qualified service personnel.
2. Protect voltage line. Avoid high pressure and be stomped on, do not pull, or push excessively.
3. Please put on this unit in a windy place, avoid direct sunshine, and nearing the heater. Place the unit in a location with adequate air circulation.
4.  Do not interfere with its proper ventilation; this will cause the internal temperature to rise and may result in failure.
5.  Avoid metals dropping in, like needles, hairpins, and coins, otherwise, the unit will get short and out of work.
6.  Be sure to set the line voltage AC230V/50Hz if you are not sure of the type of power supply, consult your appliance dealer or local power company.

For MAINS-powered apparatus and for apparatus producing internal voltages greater than 35V (peak) a.c. or d.c., having no protection against splashing water according to annex A, the instructions for use shall state that the apparatus shall not be exposed to dripping or splashing, and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

FRONT PANEL FUNCTION

1.  POWER SWITCH: Press to switch the power ON or OFF
2. AM/FM SELECTOR: To select AM or FM band radio broadcast
3.  TUNER- TUNER+: The two keys are used to adjust to the best radio station signal.
4.  AM/FM PROGRAMS: To select stored radio stations in memory
5.  AM/FM SCAN: Search and store automatically in memory the radio stations with strong signals
6. PHONO: Choose Phono moving magnetic/moving coil controls
7.  USB/BT INPUT BUTTON: Press this button repeatedly to select the desired input source USB/BT.
8. RADIO INPUT BUTTON: Press this button repeatedly to select the desired input source RADIO.
9. 7.1 INPUT BUTTON: Press this button repeatedly to select the desired input source 7.1 INPUT
10. AUX INPUT BUTTON: Press this button repeatedly to select the desired input source AUX INPUT
11. DIGITAL INPUT BUTTON: Press this button repeatedly to select the desired input source HDMI 1, HDMI2, HDMI3, OPTICAL, COAXIAL INPUT
12. HDMI (ARC) ON/OFF BUTTON: This function must be in an HDMI state. When ARC is on, the sound of a TV program output through the power amplifier to the speakers
13. DSP: Music DSP sound field effect selector
14. CH. MODE: 2.1/7.1 channel controls the selector
15.  TREBLE BUTTON: To increment the end decrement level for the selected function of a master volume, the treble auto station seek
16.  BASS BUTTON: To increment the end decrement level for the selected function of a master volume, the bass auto station seek
17. DISPLAY: Function displayed on the fluorescent window
18. MASTER VOLUME/MULTI: Adjusts the volume level
    Turn the button clockwise to increase the volume
19. MIC INPUT JACK: Karaoke mic connects to these jacks
20. MIC VOL: Adjust the volume of the microphone
21.  MIC TREBLE: Adjust the treble notes of the microphone
22. MIC BASS: Adjust the bass notes of the microphone
23.  MIC ECHO: Adjust the echo notes of the microphone
24. MIC DELAY: Adjust the delay notes of the microphone
25. REPEAT: This button is used to select the repeat or single station in the USB
26. PREVIOUS: This button is used to select the previous station is USB/BT
27.  PAUSE/PLAY: This button is used to select the pause or play station is USB/BT
28.  NEXT: This button is used to select the previous station is USB/BT
29.  HEADPHONE JACK: Headphones connect to this jack
30. USB INPUT JACK: USB flash disk connect to this jack

REAR PANEL FUNCTION

1.  TUNER ANTENNA JACK: Properly connect for AM and FM antenna
2. OPTICAL INPUT JACK: Connect the optical signal output of other sound equipment
3.  COAXIAL INPUT JACK: Connect the coaxial signal source output of other sound equipment
4. HDMI 1 INPUT JACK: Connect the HDMI signal output of other sound equipment
5. HDMI 2 INPUT JACK: Connect the HDMI signal output of other sound equipment
6.  HDMI 3 INPUT JACK: Connect the HDMI signal output of other sound equipment
7. HDMI OUTPUT JACK: Connect to the HDMI (arc) input jack of the TV
8. BT ANTENNA: This is the 2.4G BT antenna
9. VOLTAGE SELECTOR: According to the power voltage push this button to switch between 110V and 220V
10. PHONO INPUT JACKS: Connect the audio output jacks of PHONO to these jacks
11.  AUX INPUT JACKS: Connect the audio output jacks of AUX to these jacks
12. 7.1 INPUT JACKS: Connect the audio output jacks of 7.1 to these jacks
13.  SUBWOOT OUTPUT: Connect the audio input jacks of another power amplifier
14. REAR SURROUND RIGHT SPEAKER OUTPUT JACK
15. REAR SURROUND LEFT SPEAKER OUTPUT JACK
16.  SURROUND RIGHT SPEAKER OUTPUT JACK
17. SURROUND LEFT SPEAKER OUTPUT JACK
18.  CENTER SPEAKER OUTPUT JACK
19.  S.WOOFER SPEAKER OUTPUT JACK
20. MASTER RIGHT SPEAKER OUTPUT JACK
21.  MASTER LEFT SPEAKER OUTPUT JACK
22. POWER SUPPLY: Connect to AC 110V/60Hz or 220V/50Hz outlet

REMOTE DEVICE FUNCTION

1. Power standby button
2.  Mute button
3.  HDMI ARC control button
4.  Phono-moving magnetic/ moving coil controls
5.  Surround volume controls
6. Center volume control button
7. SW volume control button
8. Switch the DSP button
9.  Master volume control button
10.  Balance control button
11. . 2.1/7.1 channel control button
12. Treble control button
13.  Bass control button
14. .Switch to AM/FM button
15.  AM/FM TUNER- +: Scan button the two keys are used to adjust to the best signal of the stations. When the best signal of the stations has been found, auto-store the stations to the corresponding station number position
16. AM/FM channel button
17.  AM/FM scan controls button
18. . AM/FM stereo mono controls
19.  AM/FM MEMORY BUTTON: After a station has been found, store the station by pressing the MEMORY button. The screen will display OK.
20.  USB/BT prev control button
21. USB/BT next control button
22.  USB/BT pause/play control
23. USB Mp3 repeat button
24.  MIC volume control button
25.  MIC echo control button
26.  MIC treble control button
27. MIC bass control button
28.  MIC delay control button
29. Display control button

System Connection

Operating Instructions

Preparation before operation

• This product must be placed on a flat, solid object to ensure that it has sufficient capacity to support the product without falling.
•  Please use this product according to the safety requirements in front of this manual and connect with other products (TV, speaker, DVD player, or player) as required.
• Open the audio source device connected to this product
• Press the power switch button on the panel to turn ON the power.

MAIN CHANNEL TONE AND BALANCE
Press the ‘MENU’ on the control panel of the receiver system. Adjust the display ‘TRExx’ ‘BASSxx’ and ‘L– //–R’. ‘VOLUME/MULTI’ is a volume/Multi-function knob. This knob can adjust the main channel bass/Treble volume level and Left/Right channel volume balance.

USB OPERATION
Press the ‘Input’ button on the remote control or on the control panel of the receiver system. Select ‘USB’mode. Then insert the USB flash disk. This unit can automatically play the USB flash disk file. Then press the button to operate the corresponding function. Supports WMA/MP3/APE/PLAC files

Note:

1. Because video files continuously update, this product can’t play all format files.
2. If the USB flash disk doesn’t work in USB mode. The operation is invalid

MIC

• Insert MIC. The display will show ‘OK ON’
•  Press the “MIC VOL+/-“, “MIC ECHO+/-“, “MIC DELAY +/-” on the remote control. Adjust the microphone Master/echo/delay volume level.

HDMI

1.  Connect audio equipment (Blu-ray DVD player, Set Top Box ) with HDMI output by using an HDMI cable.
2. Press the ‘Digital input’ on the remote control or on the control panel of the receiver system. Select the appropriate channel.
3. Press the ‘CH. MODE’ on the remote control to change the channel of the broadcast program.
4. HDMI with ARC function. Set the TV audio in ‘External speaker’ or ‘Audio system’, and press ‘ARC ON’ on the remote control. The display will show ‘ARC on’, This amplifier can play the TV audio. Press ‘ARC off’, and the amplifier goes back to the default channel.

Wireless BT Function

1.  The receiver connects to your Wireless BT-enabled device, allowing the system to receive your Wireless BT signal and stream audio to any connected speaker system.
2.  Press the ‘ANALOG INPUT’ on the remote control or on the control panel of the receiver system, then enter to ‘BT’ mode–as indicated on the display screen.
3. Ensure BT is activated on your device and search for Wireless BT Network Named: PYLE PRO.
4.  No password is required for connecting.

ARC (Audio Return Channel) Function
The ARC (Audio Return Channel) function makes it easy for the PT796BT to play audio from any TV with a single HDMI cable. It can be adjusted either on the front control panel or via the included remote control. Enable your TV to send an audio signal upstream to a connected speaker system or AV receiver while eliminating additional cable connections and clutter from an optical audio cable (S/PDIF). ARC audio transmission links your speaker output to your television controls, meaning you do not need an external/additional remote or interface to configure audio levels. Enjoy an optimal multimedia home theater experience by connecting your television and Hi-Fi equipment into one, seamless entertainment system.

FM RADIO
Press the “AUTO”, ” TUNE+/-“, and “CH+/-” buttons on the remote control. Operate automatic search and save station, manually save and select the stored station function.

DSP Sound Field Control
Press ‘DSP’ or ‘CH MODE’ on the remote control. 7 different sound field effects can be selected (LIVE/HALL/DISCO/CHURCH/ROCK/JAZZ/CLASS) NOTE: Pressing those buttons on the digital input channel is invalid

DISPLAY
Press the ‘DISPLAY’ button on the remote control to adjust different display modes.

MUTE
Press the ‘MUTE’ button on the remote control to turn it ON or OFF the MUTE function.

STANDBY
Press the ‘STANDBY’ button on the remote control to turn ON the standby state. Press again to cancel standby mode.

Troubleshooting

Features:

• 7.1 Channel Receiver System
• AV (Audio/Video) Stereo Amplifier
• Hi-Fi Home Theater Surround Sound
• Built-in BT for Wireless Audio Streaming
• Next-Gen Audio DSP Sound Processing Technology
• 4K Ultra HD TV Pass-Through Support
•  3D Video & Blue-Ray Video Pass-Through Support
•  Digital Dynamic VFD Display with AM/FM Radio
• Connect & Stream Audio from External Devices
• MP3 Digital Audio Support
• USB Flash Drive Reader
•  Connection Interface: (3 IN+1 OUT) x HDMI, RCA (L/R), Speaker Binding Posts, Optical / COAX Digital Audio
• HDMI Output + Dedicated RCA Subwoofer Output
•  (2) 1/4’’ -inch Microphone Inputs
• Independent Input Source Selection
• Digital Graphic Audio Output Level Display
• Mic Echo, Bass, Treble, Volume Control Adjustment
•  Current, Short Circuit, and Over Voltage Protection

Wireless BT Connectivity:

•  Simple & Hassle-Free Pairing
• Instantly Receives Wireless Music Streaming
• Works with all of Today’s Latest Devices • Power Cable Smartphones, Tablets, Laptops, Computers, etc.)
• Wireless BT Version: 5.0
• Wireless BT Network Name: ‘PYLE PRO’
• Wireless Range: 30’+ ft.

Technical Specs:

• Power Output: 2000 Watt MAX
•  Amplifier Receiver Type: 7.1-Channel
•  Speaker Impedance: 4-16 Ohm
• S/N Ratio: >80dB
• T.H.D.: <0.05%
• Frequency Response: 20Hz-20kHz
• Radio Station Memory: 30 Presets
• Digital Audio File Support: MP3 / WMA/APE/FLAC
• Maximum USB Flash Support: Up to 1TB
• Power Cable Length: 3.9’ ft.
• Power Supply: 115V/240V, switchable

Reference Link

https://www.pyleaudio.com/sku/PT796BT/Wireless-BT-Streaming-Home-Theater-Receiver-%E2%80%93-71-Ch-Surround-Sound-Stereo-Amplifier-System-with-4K-Ultra-HD-Support

Download PDF

PT796BT (1)_4c2f1c09-a858-4601-a68a-3830b81079b2_compressed