MeeAudio Universal Dual Bluetooth Wireless Audio Transmitter User Manual
QUESTIONS? WE’RE HERE TO HELP!
Phone Support: 626-965-1008 x31
Monday ~ Friday 9am to 5:30pm PST
Email Support: support@MEEaudio.com
All emails are responded to within 2 business days
PACKAGE CONTENTS
LED INDICATOR LIGHTS
The status of the DUALSTREAM is shown by a green power / charging indicator light on the rear of the unit and two blue indicator lights on the top as follows:
FACTORY RESET / CLEAR MEMORY
To perform a factory reset of the DUALSTREAM, hold pairing button “A” for approximately 5 seconds until the blue indicator light stops blinking All previously paired devices will be cleared from memory and a new pairing will need to be created by following the procedure in STEP 2.
SAFETY AND CARE
- Clean with a soft, slightly damp cloth. Do not use chemical cleaners.
- There are no user replaceable/repairable parts in this device.
- Disassembling it will void your warranty.
- Do not expose the device to liquids. If the device comes in contact with liquids, quickly wipe away.
- If submersed in water, do not turn the device on until completely dried.
Note: liquid submersion voids the warranty. - Do not use around flammable gases as fire or explosion may occur
WARNING
Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds. Keep the device and packaging out of reach of children.
WARRANTY
MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty. Please retain a copy of your receipt as proof of purchase. For more information, visit www.MEEaudio.com/Support
PLUG IN USB POWER CABLE
ADJUSTING HEADPHONE VOLUME
Volume can be individually adjusted on each headphone or speaker paired with the DUALSTREAM.
WHEN FINISHED, POWER OFF HEADPHONES UNTIL NEXT USE
SUBSEQUENT USE
To reconnect a previously paired headphone or speaker, power on the DUALSTREAM first (if powered off) and then power on the headphone or speaker. A solid blue light on the DUALSTREAM will indicate that a connection has been established. It may take up to 60 seconds for audio transmission to begin.
PAIR A 2ND HEADPHONE OR SPEAKER (OPTIONAL)
A second Bluetooth audio device can be paired after one is already connected. To pair the second device, put it in pairing mode*, then tap pairing button “B” on the DUALSTREAM.
Once the DUALSTREAM and your device are both in pairing mode simultaneously and within 3 ft (1m) of each other, they will be paired.
*CONSULT THE USER MANUAL OF YOUR DEVICE IF YOU ARE NOT SURE HOW TO PUT IT IN PAIRING MODE
NOTE: SOUND MAY BE QUIET OR INTERMITTENT WHILE PAIRING IS IN PROGRESS.
choose an audio cable supported by your tv
IF TV AUDIO PLAYS FROM HEADPHONE, SETUP IS COMPLETE. PROCEED TO STEP 5.
NO SOUND? CHECK TV SETTINGS MENU.†
choose an audio cable supported by your tv
3.5MM [HEADPHONE JACK]
Maximize the volume on your TV
PAIR A BLUETOOTH HEADPHONE OR SPEAKER
DOWNLOAD PDF LINK
