Eufy T7400 Smart Safe Device User Manual
OVERVIEW
- Keypad
- Fingerprint Reader
- Mechanical Lock
- Charging Port
- Charging Indicator
- SYNC Button
- LED Light
SETUP
STEP 1. UNLOCK SMART SAFE
Two options are available for unlocking Smart Safe for the first time.
Option 1. Default Password
The default password “123456” will expire after setup. Use the eufy Security app to set a new password.
Option 2. Backup Key
ADD TO THE EUFY SECURITY APP
- Download and install the eufy Security app, then sign up for an account.
- Follow on-screen instructions to complete the setup.
The model T7400 supports 2.4 GHz Wi-Fi only. Make sure the Wi-Fi signal is strong.
STEP 3. CHARGE SMART SAFE
Fully charge Smart Safe before first use. This may take 2 hours if you use a 5V/2A adapter
The battery life can last up to 6 months per charge.
STEP 4. MOUNT SMART SAFE (OPTIONAL)
You can mount Smart Safe through the screw holes on the bottom.
Option 1. Wooden Surface
What you need:
Option 2. Surfaces Made out of Hard Materials
What you need:
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type T8790 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/. The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device to strong sunshine or a too wet environment. The suitable temperature for the product and accessories is -20°C to 60°C. When charging, please place the device in an environment that has normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C.
CUSTOMER SERVICE
Warranty
12-month limited warranty
Call Us
United States
+1 (800) 988 7973 Mon-Fri 9 AM-5 PM (PT)
United Kingdom
+44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany
+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00
Email Us
Customer Support: support@eufylife.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
REFERENCE LINK
https://us.eufy.com/products/t7400111
