Eufy Wet Vac w31 Quick Start Guide
Quick Tips
Insert the handle bar into the main body You will hear a click when the handle bar is locked in place.
Remove the clean water tank, open the rubber cover, and add water
Note: Use 2 bottle caps of floor cleaner for best results
Replace the clean water tank You will hear a click when the water tank is locked in place.
Prepare to clean Gently step on the foot pedal and push the handle bar backward until you hear a click.
Press the Power button to start cleaning Press the speed control button to select a rotation speed: High / Low. Press the water spray button. Water and floor cleaner will spray onto the rolling brush.
Finish cleaning Press the power button or push the handle bar forward until you hear a click. The vacuum automatically turns off.
Note: After you press the power button, it will take 5 seconds for the vacuum to stop cleaning.
Self-cleaning Place the vacuum on its charging base to charge and press the self-cleaning button. It will take 3 minutes to finish the self-cleaning. Do not move the vacuum during self-cleaning.
Cleaning and Maintenance
Remove the dirty water tank after use Press the release button to remove the dirty water tank.
Clean the dirty water tank Rinse the dirty water tank thoroughly with water.
Replace the dirty water tank After cleaning, reinstall and replace the dirty water tank by tilting it backward at a 45° angle.
Note:
When the “Cleaning” indicator for the dirty water tank lights up red, check if the filter and dirty water tank are dirty. Wash and air dry them before reuse.
The quick start guide is for routine cleaning. You can find detailed instructions in the user manual.
DOWNLOAD PDF LINK
