Table of contents
show
Wyndham Collection Strada 48″ Single Vanity Marble Counter Installation
- Prior to installation please check received items against the “Packing List”. Please report any missing items to your retailer immediately.
- Protect all surfaces from sharp objects, high heat sources, direct prolonged sunlight and chemical hazards.
- Professional installation recommended.
- Please install on a level surface. If minor door and drawer alignment is required, please follow the easy directions below.
PACKING LIST
(Not all components may be included, depending upon your purchase)
HOW TO ADJUST HINGES (if required)
REQUIRED TOOLS NOT IN BOX
INSTALLATION INSTRUCTIONS
- The handles are safely stored for transport in a box inside of the cabinet. Look inside the vanity for the box with your handles.
- Unpack the handles and install them on the vanity. Do not over tighten when attaching.
- Short screws are for the door handles and long screws are for the drawer handles.
- Install the counter. Seal around the top of the cabinet with clear silicone sealant. Do not over apply. Allow to dry 24 hours for proper curing.
- Install the mirror: use a pencil to mark the placement of the screw holes on the wall, drill the holes and insert the plastic wall anchors.
- Install the screws into the wall anchors, leaving enough of the screw exposed to hang the mirror – approx 1/4” – 1/2”.
HOW TO ADJUST DRAWER SLIDES (if required)
Scan the QR code with your phone to watch detailed video instructions or visit www.wyndhamcollection.com/3dslides
Backboard Cutouts
Electrical Outlets with Charging Hub
DOWNLOAD PDF LINK
