Bengoo TA80 Wireless 7.1 RGB Gaming Headset User Manual
INTRODUCTION
BENGOO AT80 wireless 7.1 RGB surround sound gaming headset, equipped with a 50mm high precision neodymium drivers and soft leatherette ear cups, which offers a particularly immersive sound quality, delivers you an extreme gaming experience and greatly highlight your gaming Moshe. Some for angry Fe write me USB portion , it could be perfectly compatible with PC/Laptop, PS4, Mac and other devices with USB port.
WARNING
To prevent possible hearing damage, do not listen at high volume levels for long periods.
PRODUCT OVERVIEW
- Adjustable Headband
- Foldable Earmuffs
- Retractable Microphone
- RGB LED Light
- Volume Wheel
- Mic On/Off Button
- Power Button
- Power LED
- Charge Port
- USB Charge Cable
- 1 2.46 Wireless Adapter
HEADSET POWER/MIC BUTTON
Headset Power Button
- Power On/Off: Hold down the power button for 3 seconds until you hear a beep.
- Play/Pause: Click the power button once
Mic Mute Button
HEADSET CHARGING
- It is recommended to fully charge the headset before first use.
- When the headset remaining the battery level is low, you will hear a beep on your headset.
- Connect the Type-C cable to the charging port on the headset, and plug the other end into any USB power source.
HEADSET CONNECTION
To use the wireless headset on your device (PC, PS4, Nintendo, Mac):
- Connect the wireless adapter to a USB port on your device (PC, PS4, Nintendo, Mac).
- Press the power button on the headset for 3 seconds to power on.
- When the headset ear cup LED is solid, the headset is connected.
Note: If it is your first time using the headset, you may need to set the headset as the default input and output device.
Headset PlayStation 4 Configuration
TROUBLESHOOTING TIPS
TECHNICAL SPECIFICATIONS
SAFETY AND PRECAUTIONS
Carefully read the information in this instruction manual and on the package before using this product.
Safety
- Observe all warnings, precautions and instructions.
- CHOKING HAZARD-Contains small parts. Keep out of the reach of small children.
- Stop using the system immediately if you begin to feel tired or if you experience discomfort or pain in your head while operating the wireless stereo headset. If the condition persists, consult doctor
- Avoid prolonged use of the wireless stereo headset. Take a break at about 15-minute intervals.
- Permanent hearing loss may occur if the headset is used at high volume. Set the volume to a safe level.
- Overtime, increasingly loud audio may start to sound normal but can actually be damaged to your hearing
- If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the sooner your hearing could be affected. To protect your hearing:
- Limit the amount of time you use the headset at high volume.
- Avoid raising the volume to block out noisy surroundings.
- Lower the volume if you can’the ar people speaking near you.
- If you feel that the headset is irritating your skin, stop using it immediately.
- Do not disassemble or insert anything into the headset because this may cause damage to the internal components or cause injury to you.
- Observe all signs and instructions that require an electrical device or radio product to be switched off in designated areas, such as gas/refuelling stations, hospitals, blasting areas, potentially explosive atmospheres or aircraft.
- The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 60°C, or incinerate.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
REFRENCE LINK
