TRIBIT BTS12 WIRELESS SPEAKER User Manual
Packing List
Product Illustration
Charging
- Connect this speaker to a SV power outlet via the providing USB-C charging cable.
- Charge other devices: Connect the speaker with your USB-enabled device via a USB-C charging cable.
BATTERY INDICATOR
Button
Power on/off
Bluetooth Connection
The Storm Box Micro 2 Speaker will automatically connect to the last paired device again if available. If it fails, the speaker will enter to pairing mode.
The speaker can remember up to 8 paired Bluetooth devices.
Better still, it can connect to 2 devices simultaneously at a time.
Conversion betwen 2 Connected Devices
- Pause the playback of the current device
- Play the audio file of the other device
Volume Adjustment
Multifunctional Button (MFB)
Party Mode
- Make sure both two speakers are turned on.
- Long press the Bluetooth button* of speaker A for Ss to enter the party mode pairing. (Note: this speaker will be regarded as the main speaker)
- Long press the Bluetooth button* of speaker B for 1 s to enter the pairing mode.(Note: this speaker will be regarded as a secondary speaker). When you hear the prompt tone “party mode’; the speaker A and B successfully enter the party mode.
Note: The function of party mode can be realized only when you have 2 Tribit Storm Box Micro 2 speakers.
Stereo Mode
- Make sure both two speakers have entered party mode.
- Short press the Bluetooth button on any of the two speakers.
- Release the buttons when you hear the voice of Stereo Mode. One speaker will sound “Left” and the other will sound “Right’; and then the stereo mode is activated.
Note: The function of stereo mode can be realized only when you have 2 Tribit Storm Box Micro 2 speakers.
Specifications
- Bluetooth Version 5.3
- Output Power l0W
- Frequency 70Hz- 20KHz
- Battery Type 3.6V I 4700mAh Lithium battery
- Dimensions 99.8 x 99.8 x 42.9 mm
- Waterproof Grade IP67
- Frequency band 2.402GHz~ 2.480GHz
- Maximum transmission power ;c; 6dBm
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
