Viewsonic VG2453 24 Inch Ergonomic Business Monitor User Guide

Viewsonic VG2453 24 Inch Ergonomic Business Monitor User Guide

Important Safety Instruction

1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings and follow all instructions.
4. Sit at least 18” / 45 cm from the LCD display.
5. Always handle the LCD display with care when moving it.
6. Never remove the rear cover. This LCD display contains high-voltage parts. You may be seriously injured if you touch them.
7. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
8. Avoid exposing the LCD display to direct sunlight or another heat source. Orient the LCD display away from direct sunlight to reduce glare.
9. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this guide for further instructions.
10. Avoid touching the screen. Skin oils are difficult to remove.

Package Contents

Your LCD display package includes:

• LCD display
• Power cord
• mini DP cable
• USB 3.0 cable
• Quick Start Guide

IMPORTANT:

• The word “Windows” in this user guide refers to the Microsoft Windows operating system.
• Visit the “Download” section of the monitor product page on the ViewSonic website to download your monitor drivers.
• Don’t forget to register your ViewSonic monitor! Simply login to the ViewSonic website in your region and click on the “Support” tab on the front page.
• Save the original box and all packing material for future shipping needs.
• The video cables included in your package may vary depending on your country. Please contact your local reseller for more information.

Quick Installation

• Connect video cable
• Make sure both the LCD display and computer are turned OFF.
• Remove rear panel covers if necessary.
• Connect the video cable from the LCD display to the computer. Macintosh users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter. To order a ViewSonic® Macintosh adapter, contact ViewSonic Customer Support.
• Connect power cord (and AC/DC adapter if required)

• Turn ON LCD display and computer Turn ON the LCD display, then turn ON the computer. This sequence (LCD display before computer) is important.
• Windows users: Set the timing mode (example: 1024 x 768) For instructions on changing the resolution and refresh rate, see the graphics card’s user guide.
• Installation is complete. Enjoy your new ViewSonic LCD display.

Additional Software Installation (Optional)

• Load the ViewSonic CD on your CD/DVD drive.
• Double click on the “Software” folder and choose an application, if desired.
• Double click on the Setup.exe file and follow the onscreen instructions to complete the simple installation.

Wall Mounting (Optional)

NOTE: For use only with UL Listed Wall Mount Bracket.

To obtain a wall-mounting kit or height adjustment base, contact ViewSonic or ® your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following:

• Verify that the power button is turned Off, then disconnect the power cord.
• Lay the LCD display face down on a towel or blanket.
• Remove the base. (Screws removal might be required.)
• Find and identify one of the following VESA mount interfaces (a,b,c) located on the back of your display (refer to “Specifications” page for your displays mounting interface). Attach the mounting bracket from the VESA compatible wall mounting kit using screws of the appropriate length.

• Attach the LCD display to the wall, following the instructions in the wall-mounting kit.
• To mount your Cloud Box (Optional) on the Stand of Viewsonic LCD Display.

NOTE: Screws: M4 X L 8.5*2

Using the LCD Display

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and refresh rate (or vertical frequency; example 60 Hz). After setting the timing mode, use the OSD (On-screen Display) controls to adjust the screen image. For optimal picture quality, please use the recommended timing mode specific to your LCD display listed on the “Specification” page.

To set the Timing Mode:

• Setting the resolution: Access “Appearance and Personalization” from Control Panel via the Start Menu, and set the resolution.
• Setting the refresh rate: See your graphic card’s user guide for instructions.

OSD and Power Lock Settings

• OSD Lock: Press and hold [2] and the up arrow [3] for 10 seconds. If any buttons are pressed the message OSD Locked will display for 3 seconds.
• OSD Unlock: Press and hold [2] and the up arrow [3] again for 10 seconds.
• Power Button Lock: Press and hold [2] and the down arrow [4] for 10 seconds. If the power button is pressed the message Power Button Locked will display for 3 seconds. With or without this setting, after a power failure, your LCD display’s power will automatically turn ON when power is restored.
• Power Button Unlock: Press and hold [2] and the down arrow [4] again for 10 seconds.

Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the on-screen OSD control settings.

• Standby Power On/Off
• Power light
• Blue = ON
• Amber = Power Saving
• Displays the Main Menu or exits the control screen and saves adjustments.
• Displays the control screen for the highlighted control. Also a shortcut to Auto Input toggle (D-Sub or HDMI). ▲/▼
• Scrolls through menu options and adjusts the displayed control settings. Blue Light Filter (▼) / View Mode (▲).

The following tips may help you optimize your display:

• Adjust the computer’s graphics card to support a recommended timing mode (refer to “Specifications” page for recommended setting specific to your LCD display). To find instructions on “changing the refresh rate”, please refer to the graphics card’s user guide.
• If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible. (The black border around the edge of the screen should barely touch the illuminated “active area” of the LCD display.)

Main Menu Controls

NOTE: Check the Main Menu items on your LCD OSD and refer to Main Menu Explanation below.

Main Menu Explanation

NOTE: The Main Menu items listed in this section indicates whole Main Menu items of all models. The actual Main Menu details corresponding to your product please refer to your LCD OSD Main Menu items.

• Audio Adjust: adjusts the volume, mutes the sound, or toggles between inputs if you have more than one source.
• Color Adjust: provides several color adjustment modes, including preset color temperatures and a User Color mode which allows independent adjustment of red (R), green (G), and blue (B). The factory setting for this product is native.
• Input Select: toggles between inputs if you have more than one computer connected to the LCD display.
• Manual Image Adjust: displays the Manual Image Adjust menu. You can manually set a variety of image quality adjustments.
• Setup Menu: adjusts On-screen Display (OSD) settings.
• View Mode: The View Mode menu appears. You can execute various View Mode settings.

Power Management

This product will enter to Sleep/Off mode with black screen and reduce power consumption within 5 minutes of no signal input.

Specifications

Cleaning the LCD Display

• MAKE SURE THE LCD DISPLAY IS TURNED OFF.
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.

To clean the screen:

• Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
• If the screen still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

• Use a soft, dry cloth.
• If the case still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Disclaimer

• ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display.
• ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol based cleaners.

Troubleshooting

No power

• Make sure power button (or switch) is ON.
• Make sure A/C power cord is securely connected to the LCD display.
• Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage.

Power is ON but no screen image

• Make sure the video cable supplied with the LCD display is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attached permanently to the LCD display, tightly secure it to the LCD display.
• Adjust brightness and contrast.
• If you are using an Macintosh older than G 3, you need a Macintosh adapter

Wrong or abnormal colors

• If any colors (red, green, or blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection.
• Connect the LCD display to another computer.
• If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.

Control buttons do not work

• Press only one button at a time.

Copyright Information

Copyright © ViewSonic Corporation, 2017. All rights reserved. ® Corporation in the United States and other countries. ViewSonic, the three birds logo, On View, View Match, and View Meter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS, Display Port, and DDC are trademarks of VESA. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).

FCC Compliance Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver

Mexico Limited Warranty

What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during
the warranty period. If a product proves to be defective in material or workmanship during the warranty period,
ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts
may include remanufactured or refurbished parts or components & accessories.

Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the
implied warranty of merchantability and fitness for a particular purpose.

REFERENCE LINK

https://www.viewsonic.com/