NUWAVE BruHub 3 IN 1 Coffee Maker Manual

NUWAVE BruHub 3 IN 1 Coffee Maker Manual

IMPORTANT SAFEGUARDS

1. Read all instructions.
2. Close supervision is necessary when any appliance is used by or near children.
3. Do not touch hot surfaces. Care must be taken as burns can occur from touching hot parts of the coffee maker.
4. To protect against electric shock, do not place cord, plug, or base in water or other liquid.
5. Unplug from outlet when the coffee maker is not in use and allow to cool before cleaning.
6. Only operate the coffee maker on flat surface, away from the edge of counter.
7. Call Customer Service at 1-877-689-2838 or email help@nuwavenow.com for information on repairs.
8. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electrical shock, or bodily injury up to and including death.
9. Do not use outdoors.
10. Do not use appliance for other than intended use.

SAVE THESE INSTRUCTIONS

Other Consumer Safety Information
This appliance is intended for household use only.

• a) A short power-supply cord (or detachable power-supply cord) is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
• b) Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
• c) If a long detachable power-supply cord or extension cord is used:
  1. The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance;
• If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cored; and
• The longer cord should be arranged so that it will not drape over the counter top or table to where it can be pulled on by children or tripped over.

PARTS FOR YOUR NUWAVE BRUHUBTM

1. Tank Lid
2. Water Tank Part #: 451201
3. BruHubTM Base Part #: 45110
4. Drip Tray Base Part #: 451213
5. Insert Chamber
6. Mug Tray Part #: 451214
7. Screen Part #: 45126
8. Charcoal Filter Part #: 45116
9. Charcoal Filter Holder Part #: 451205
10. Plastic Thermal Carafe Part #: 45121 SS Thermal Carafe Part #: 45131 (optional)
11. Carafe Base Part #: 45121A
12. Carafe Lid Part #: 45121B

WATER COMPARTMENT

Fill water directly in the Water Tank when attached, or remove first. To fill directly in the Water Tank:

1. Lift the Water Tank Lid up and pour in water to appropriate fill line.
2. Close the Water Tank Lid.

To fill Water Tank when removed:

1. Lift Water Tank Lid and place to the side.
2. Lift Water Tank up to remove from the side.
3. Fill to appropriate fill line.
4. Slide Water Tank straight down, ensuring the hooks fit snug with Water Tank.
5. Place lid back on top of Water Tank.

ASSEMBLY FOR INSERTS

With your NuWave BruHubTM 3-in-1 Coffee Maker, you can choose from three different inserts to customize your coffee-drinking experience and preference.

Single Serve Insert

1. Line up dots with each other and place Single Serve Insert into the Insert Chamber.
2. Place pod into Single Serve Insert until connected, indicating needle has gone through.
3. Close down Single Serve Lid.
   • Make sure lid is fully closed.
   • Use Mug Tray on Drip Tray Base and Screen for smaller cups and mugs.
   • Use “8” and “12” sizes for Single Serve Insert.

Hot Water Insert
Line up dots with each other and place Hot Water Insert directly down into Insert Chamber. Close lid.

• Use Mug Tray on Tray Base for smaller cups and mugs.
• Use “8”, “12”, “half carafe”, and “carafe” for Hot Water Insert.

CHARCOAL FILTER HOLDER ASSEMBLY

For additional water purification, use the supplied (optional) Charcoal Filter Holder with Filter. Note: The coffee maker will still operate without Charcoal Filter Holder installed.

1. Before first use, apply pressure to release tab to open Charcoal Filter Holder compartment and remove Charcoal Filter.
2. Flush Filter by running under cold tap water for 1-3 minutes before initial use. After flushing, allow the Filter to drain completely.
3. Carefully place Filter back into compartment and snap to close.
4. Insert the Charcoal Filter Holder into the Water Tank. The Filter Holder’s base should sit firmly into the channel.

FUNCTIONS FOR THE NUWAVE BRUHUBTM (CONT.)

Size selection function:
This lets you choose your amount of beverage you would like brewed.

1. Default is set for “8”, which is 8 ounces.
2. Press the “size selection” button again to change the selection to “half carafe”, “carafe”, and back to “8”.

• Refer to Insert & Beverage Selection Charts for more information.

Brew function:
Once you have hit “Power” to turn the unit on, have chosen your selection of beverage, and size, you can now brew.

• Press the “Brew” button.
• There will be a red light next to “Preheating”. Once unit has preheated, the red light will turn off, indicating the water is ready to brew and unit will start brewing.
• Unit will beep when the brew is complete.
• DO NOT lift lid during brewing cycle.
• To stop the brewing function, press “Brew” button again.

CLEANING AND MAINTENANCE

To clean Hot Water Insert, pull up Hot Water Cap to separate and clean insides of both parts.

• Hot Water Insert and Hot Water Cap are dishwasher safe, top rack only.
• Hot Water Cap snaps back on after it’s cleaned.

Cleaning Carafe

To clean the Carafe, use warm soapy water and rinse thoroughly. Use a soft foam brush with a long handle to reach the bottom.

• The Carafe Lid is removable and is dishwasher safe, top rack only

External Cleaning

To clean the exterior of your coffee maker, wipe with a damp, soapy, soft cloth.

Descaling
Scale is a buildup that can occur over time after many uses of your appliance. Descaling should be performed every few months to keep your BrewHub working effectively and efficiently. Parts that come into contact with water during the brewing process can have a calcium buildup. Also, the heating element may have deposits that need to be removed.
To descale, use the carafe, fresh water, a safe descaling solution, and perform task near a sink.

TROUBLESHOOTING

When unit is powered on and no water is in the unit:

• Unit will beep, and within 15 seconds it will shut off.
• If you press “Brew” and there is no water, a continuous beep will sound for up to 15 seconds until you add water.
• If you do not add water within 15 seconds of the continuous beeping, the unit will shut off, and beeping will stop.

If unit is in the middle of brewing and there is not enough water:

• A continuous beep will sound for up to 15 seconds until you add more water.
• If you do not add water after 15 seconds of the continuous beeping, the unit will shut off.

If unit shuts off and you power up the unit again with no water.

• Unit will beep, and within 15 seconds it will shut off.
• If you press “Brew” and there is no water, a continuous beep will sound for up to 15 seconds until you add water.
• If you do not add water within15 seconds of the continuous beeping, the unit will shut off, and beeping will stop.
• Press “Brew” after the 15 seconds have passed.

Consistent beeping:

• Need to make sure enough water is in the Water Tank.
• The Water Tank has been removed from coffee maker.

Not brewing right away:

• Appliance needs to preheat.
• Needs appropriate amount of water.
• Unit may have automatically shut off. Simply press “Power” to turn back on.

LIMITED WARRANTY

THE MANUFACTURER WARRANTS
The NuWave BruHubTM 3-in-1 Coffee Maker, including the BruHubTM Base, the Water Tank Lid, the Water Tank, the Drip Tray Base, the Mug Tray, the Screen, the Charcoal Filter Holder, the Plastic Thermal Carafe, the Hot Water Insert, the Single Serve Insert, and the Custom Brew Insert with Filter Basket are to be free from manufacturer defects.

REFERENCE

https://www.nuwavenow.com/shopmenu/cooking-appliances/blendercoffee

DOWNLOAD PDF

NUWAVE BruHub 3 IN 1 Coffee Maker Manual