Anker A1215 PowerCore 13000 Portable Charger User Manual featured img

Anker A1215 PowerCore 13000 Portable Charger User Manual

Anker logo

Anker A1215 PowerCore 13000 Portable Charger User Manual

Anker A1215 PowerCore 13000 Portable Charger User Manual prduct img

Using Your PowerCore

Check the power level

Anker A1215 PowerCore 13000 Portable Charger User Manual fig 1

Charge your phone or tablet

Anker A1215 PowerCore 13000 Portable Charger User Manual fig 2

No Lightning cable included

Recharge your PowerCore

Anker A1215 PowerCore 13000 Portable Charger User Manual fig 3

When your PowerCore is fully charged, the LED indicators will turn off.

IMPORTANT SAFETY INSTRUCTIONS

  • When using this product, basic precautions should always be followed, including the following:
  • Read all the instructions before using the product.
  • To reduce the risk of injury, close supervision is necessary when the product is used near children.
  • Do not put your fingers or hands into the product.
  • Do not expose the power bank to rain or snow.
  • Use of a power supply or charger not recommended or sold by a power pack manufacturer may result in a risk of fire or injury to persons.
  • Do not use the power bank in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury to persons.
  • Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
  • Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
  • Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause an explosion.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • (1) Reorient or relocate the receiving antenna.
  • (2) Increase the separation between the equipment and receiver.
  • (3) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • (4) Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 (800) 988 79733 This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A2667 is in compliance with Directive 2014/35/EU & 2014/30/ EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.anker.com Hereby,

Anker Innovations Limited declares that the product type A2667 is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com.

  • Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

REFERENCE LINK

https://support.anker.com/s/article/A1215-PowerCore-13000-User-Manual

DOWNLOAD LINK

Anker A1215 PowerCore 13000 Portable Charger User Manual

Leave a Reply