Airthereal MA10K-Pro Smart WiFi Ozone Generator User Manual


Airthereal MA10K-Pro Smart WiFi Ozone Generator User Manual


Congratulations on your purchase and welcome to Airthereal! To fully benefit from the support that Airthereal offers and get a 1-year warranty extension, please register your purchase at


READ ALL INSTRUCTIONS BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE. When using electrical products, especially when children are present, basic safety precautions should always be followed, including but not limited to the following


  • Do not place or store the device where it can fall or be pulled into a tub or sink, or where it will sit or drop into water or other liquids.
  • Do not reach for a charger that has fallen into water. Unplug immediately.
  • Never use a charger with a damaged cord or plug.
  • Keep the cord away from heated surfaces.
  • Children should be supervised to ensure that they do not play with the product.
  • Never force the plug into an outlet; if the plug does not easily fit into the outlet, do not use this outlet.


  • Never use the product when people or pets are in the same room.
  • Exposure to high concentration of ozone can be harmful. Make sure all ozone is reverted back to oxygen before you enter the space, which takes approximately 30 minutes of airing out your room with the windows open,
  • Do not use attachments other than those recommended by the manufacturer.
  • Do not insert objects into the air filter or block it by placing it on a soft surface or in a position where it will be blocked by an object (examples of objects: magazine, tissue paper, hair, and anything similar).
  • Use this product only for its intended use as described in this document or as recommended by Airthereal,
  • This product is for indoor use only.









Choosing a location
  • Place the unit at least 15 inches away from TVs, radios, and other electronic products. Make sure there’s plenty of space for Ozone to be exhausted from the machine.
  • Before beginning ozone treatment, thoroughly clean up the source of the odor first.

Please make sure the operating voltage is the same as shown on the parametric label. This unit will not function properly using in conjunction with external devices that alter or convert voltage or frequency of electricity.

Getting Started
  • Insert the power cord into an electrical oudist.
  • Close all windows and doors to completely seal the room. Please note that all ozone machines have to be used in unoccupied space only.
  • Press Power Button to turn the power on. When turned on, the LCD will light up, and the Fan Speed and Ozone Control will be twinkling.
  • Choose your settings, then exit the room while ozone is being produced. After 5 seconds, the unit will produce ozone according to the default settings. By default, the unit will run with the lowest ozone output (2g/h) and the minimum fan speed (40 CFM).

NOTE: This unit comes with a 5-second delay for ozone generation. Once you select the operating mode, the 5-second delay will start counting down. When the 5-second delay countdown ends the unit will start operation, which gives users enough time to leave without breathing in ozone directly.

Other Features

Fan Speed

Press to switch between 5 different speeds of air circulation to control the ozone diffusion. Each press will cyce between 40 CFM > 60 CFM -> 70 CFM – > 85 CFM – > 100 CFM – >40 CFM.

Ozone Control

Press to select the right ozone output according to the room sizes and air problems. Each press will cycle between 2 g/h – > 4 g/h > 6 g/h -> 8 g/h -> 10 g/h -> 2 g/h…


When the power is turned on, pressing the timer button wil cyde through 1 hr -› 2 hrs > 4 hrs › . … > 12 hrs > 0 hr etc. If you are setting the timer, setting it to 0 is to deactivate the timer function. If the timer is counting down, it will automatically turn off when it counts down to 0.

NOTE: The unit can run for the length of time that has been selected and automatically shut off. However, the unit can’t automatically power on.



You can press the Interval Button to set the cycle mode when the power is on. If you shut down the unit, it will terminate the cycle. Pressing the Interval button will cycle through the following settings:

  • Produce ozone for 1 hour every 12 hours
  • Produce ozone for 2 hours every 12 hours
  • Produce ozone for 1 hour every 24 hours
  • Produce ozone for 2 hours every 24 hours

Treatment Frequency

Depends on your needs. At least once a week to keep fresh air indoors.

ATTENTION: Use in unoccupied space only!

There might be an ozone smell remaining in the room after treatment. Open doors and windows to ventilate for at least 30 minutes (or longer according to your treatment time and room area) after the treatment and before people return to the space.


If you are not going to use the product for an extended period of time, unplug it from the electrical outlet, clean it and store it in a cool and dry place away from direct sunlight.


Airthereal warrants its products for 3 years after the date of purchase. Internet information:

  • What’s covered?
    Defects due to faulty materials and workmanship of the product.
  • What’s NOT covered?
    Damage caused by the owner when attempting to fix or alter the product by himself or herself. Damage caused by misuse, abuse, neglect, alterations or unauthorized repair. Natural depreciation.
  • Warranty Period
    Warranty becomes effective since the date of original purchase and will last for three (3) years.
  • Who’s covered?
    This limited warranty is only effective for the original purchaser. It is NOT transferable.
  • How to request warranty services?
    To obtain the benefit of this warranty, please leave your message online (, or send an email to Our customer service will address your issue in 24 hrs.
  • What will Airthereal do?
  • Repair the item.
  • Replace the item if not repairable.
  • Refund under certain circumstances.


Q: What is Ozone

A: Ozone exists in the upper layer of the atmosphere to protect people from the sun’s ultraviolet radiation. We also sense ozone’s fresh and clean smell after thunderstorms. Now we have Airthereal Ozone Generators to move nature’s powerful sterilizer into your home. Ozone (Os) contains three atoms of oxygen. The third oxygen atom makes ozone extremely reactive, which readily attaches itself to other molecules. When odors, bacteria, or viruses meet ozone, oxidation reactions occur and both parties are destroyed. Ozone essentially reverts back to oxygen. That’s why it’s environmentally friendly.

Q: Ozone Air Purifier VS Air Filters

A: Air filters are normally the result of a physical process of moving air through layers of filtration. However, ozone generators produce activated oxygen that removes odors and freshens the air.

Q: Safety Concerns

A: High ozone concentration can be irritating to mucous membranes and the respiratory system. The right level is when all the generated ozone is being consumed. This only applies to continuous ozone use in occupied environments-not for shock treating. with ozone, more is not considered better. Ozone can work even when humans are not able to smell it.

Q: How Ozone Air Purifiers work

A: Ozone generators create ozone using mechanisms such as ultraviolet light or a corona discharge (a type of electrical discharge). The machine is also equipped with a fan that disperses the ozone out into the air. These ozone particles come into contact with indoor air pollution and neutralize them.

Q: How Long Does Ozone Last

A: As soon as ozone is formed in the generator and dispersed in a room, some of it everts back into oxygen. Ozone itself has a 30 minute half life, which means that half of the ozone created will revert to oxygen usually within 30 minutes. After each subsequent 30-minute period there would be half as much residual ozone left at the end of the period as was present at the beginning of the period. In real life, the half-life is usually less than 30 minutes due to temperature, dust, and other contaminants in the air. Therefore ozone, while very powerful, doesn’t last long. It does its job and then disappears.



If you suspect a problem with your unit, please first check the following:

  • Unit is plugged in properly and turned on.
  • Wall outlet is effective.
  • Clean or change the ozone plates as follows if the ozone output is weak.

Replacing the Ozone Plate

  • Unplug the unit from the power cord.
  • Unscrew the four screws on both sides of the machine to remove the top of the case. Press the handle, loosen the ozone holder, and remove the ozone plate.
  • Clean it with water or replace it with a new one.
  • Make sure the plate is dry and the metal terminals contact well.


Changing the Fuse

  • Push in and turn the fuse holder to the left with a straight screwdriver and remove the old fuse.
  • Replace it with a spare (spare fuse is located inside the fuse holder).
  • Use a 4 amp fuse 1.25 inches Iong.


Cleaning the Pre-Filter

For optimal use, please clean the pre-filter once every 6 months.

  • Pry off the plastic pre-filter casing with a flat-head screwdriver.

Clean the pre-filter with soap and water. Completely dry before reinstalling.




Leave a Reply