Alogic DUTHD Universal Twin HD Docking Station User Manual


Alogic DUTHD Universal Twin HD Docking Station User Manual



ALOGIC Universal Twin HD Docking station expands the capabilities of your Windows or Mac laptop by adding the capability to support two Full HD monitors via the HDMI ports, additional USB-C and USB-A peripherals, Wired Ethernet Network, Mic & Speakers and more to add versatility to your working environment


Input (Upstream)
Lock Slots
USB-C port
1 x USB-C 3.1 Gen 1 (5Gbps), 3 x USB-A 3.0 (5Gbps).
1 x USB-A 3.0 with BC 1.2, 1 x Audio / Microphone,
1 x RJ45 Gigabit Ethernet (10/100/1000Mbps).
2 x HDMI – Up to 1920x1080p®60Hz
1 x Kengsington Lock Siot, 1 * Nano Lock Slot
2 years


  • Universal Twin HD Docking Station supports compatibility with most of the laptops and computers.
  • All essential and advanced connectivity options – 2 x HDMI 1920 x 1080p@60Hz or single display at 2560 x 1440@50Hz, USB-C 3.1 Gen 1 (5Gbps). 3 x USB-A 3.0, 1 x Gigabit Ethernet (10/100/1000Mbps), 1 x 3.5mm Combo Headphone & Mic Jack and 1 x Kensington Lock Slot & Nano Lock Slot.
  • Gigabit Ethernet Port for a wired connection
  • 5Gbps USB-C and USB-A ports for connecting accessories for high-speed data transter

Package Contents

  • ALOGIC Universal Twin HD Docking Station
  • 1m C to CIA Combo Cable
  • Power Supply – AU, EU, UK, US each
  • User manual

Physical Layout

  1. Power Button
  2. Audio & Mic Port
  3. USB-C
  4. Lock Slots
  5. DC output
  6. USB-C Upstream
  7. USB-A
  8. HDMI
  9. Gigabit Ethernet


Operation Instruction

  • Connect the power supply to the docking station, followed by the appropriate cable to the wall socket and the power supply.
  • Once connected, push the power button at the front of the Dock, the LED on the docking station will glow white to indicate the device is ready to use.
  • Install the DisplayLink Drivers on your Mac Or Windows computer by going to
  • To connect your monitors, connect the docking station and the monitors with 2 x HDMI cables’
  • For a wired internet connection, plug an ethernet cable’ into the RJ45 Jack. A green LED will indicate the power is active and an orange LED for a successful connection.
  • Connect your existing USB-C and USB-A accessories to the respective ports for use.
  • Plug in your headphones and mic into the 3.5mm audio jack
  • Once all the accessories are plugged in, use the included C to C/A Combo Cable to connect the USB-C end of the cable to the dock’s upsteam USB-C port and the USB-C or USB-A end of the cable to your computer as required. ‘ HDMI & Ethernet cable not included.


Leave a Reply