Amazfit A1811 Smart Watch User Manual
Package Contents
- Amazfit Verge Smartwatch
- Charging Cradle
- User Manual
Know the watch
Install the App
Scan the QR code below with your mobile phone, or search for the “Amazfit Watch” App in major application markets and have it installed.
Turn Your Watch On/Of
- To turn on your watch, press and hold the button on its top right side. Your watch screen will light up and show a startup animation. The animation may play for several minutes upon initial startup.
- To turn off your watch, press and hold the same button for more than six seconds to display the turn-off interface.
- A QR code will be displayed on your watch screen when it first turns on. This code will be used to pair your watch with your mobile device.
- When the screen of the watch is in its resting state after being switched on, press the same key as the above to lighten the screen up shortly.
Binding your watch
Open the “Amazfit Watch” App on your mobile phone, log in, and scan the QR code displayed on the watch for binding as prompted.
Charging your watch
Attach your watch to the charging cradle as shown below. Make sure to align the four charging pins on the backside of the watch with the ones on the charging cradle. Connect the charging cradle to a USB plug or a computer by using the provided USB cable. The “Charging” notification will display on the watch screen once it is successfully clipped in. Please use an adapter that is rated 5v and above 1.0A to charge.
Built-In Battery Precautions
Do not attempt to replace the device’s battery on your own or use force to open the built-in battery. Please only use the official charging base to charge your device.
Safety Notice
- The watch has the IP68 water and dust resistance rating, which can withstand soaking for 30 minutes in fresh water at about 1.5 meters deep at normal temperature, but does not support usage inside showers, saunas, or swimming pools.
- Please do not operate the watch underwater. After submerging, dry it with a so cloth before operating or charging.
- The watch is not waterproof against corrosive liquids such as acidic or alkaline solutions, chemical reagents, etc. The damage or defect caused by misuse or improper use is not within the scope of a warranty.
Regulatory Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- FCC ID: 2AC8UA2013
Any changes or modifications that are not expressly approved by the party responsible for the compliance may void the user’s authority to operate the device.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.
Certifications and Safety Approvals
Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio device type A1943/A1945 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://en.amazfit.com/support.html
Specifications
- Name: Amazfit Verge
- Model: A1811
- Battery Capacity: 390 mAh
- Wireless Connectivity: Bluetooth 4.2 BLE / Wi-Fi
- Input Voltage: 5 V DC 700 mA (Max.)
- Frequency: 2402 – 2480MHz
- Max. Output: 9 dBm
- Operating Temperatures: 0°C ~ 40°C / 32°F ~ 104°F
- Water & Dust Resistance Rating: IP68
- Compatible With: Android 4.4, iOS 9.0 or above
Warranty and Return Policy
All Amazfit products are covered by a 1-year limited warranty.
- Official website: en.amazfit.com
- U.S . website : us.amazfit.com
- Help: support.amazfit.com
- Email us at: support@amazfit.com
REFERENCE LINK
https://support.amazfit.com/en/product/verge
