Amazon Basics B07W8YJ4KC Digital Body Weight Scale User Manual

Amazon Basics B07W8YJ4KC Digital Body Weight Scale User Manual

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use.
If this product is passed to a third party, then these instructions must be included.
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

• Use this product only on a firm, level ground.
• This product is not a toy. Children should not play with the product.
• Do not place this product in an environment with strong electromagnetic disturbances.
• Handle this product with care at it is a precision instrument.
• CAUTION Risk of injury! Do not apply shock that may cause the glass surface to break.

SAVE THESE INSTRUCTIONS

Battery Warnings

• Do not mix old and new batteries or batteries of different types or brands.
• Exhausted batteries should be immediately removed from product and properly disposed.
• Keep batteries out of the reach of children.
• Do not dispose of batteries in fire.
• Remove batteries from product if it is not to be used for an extended period of time unless it is for emergency purpose’s.
• If the battery leaks avoid contact with skin and eyes. Rinse affected areas immediately with plenty of clean water, then consult a doctor.
• Always insert batteries correctly with regard to polarity (+ and –) marked on the battery and the product.
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not force discharge batteries.
• Do not heat batteries.
• Do not weld or solder directly to batteries.
• Do not dismantle batteries.
• Do not deform batteries.
• Do not encapsulate and/or modify batteries.
• Store unused batteries in their original packaging away from metal objects.
• Always select the correct size and type of battery most suitable for the intended use. Information provided with the equipment to assist correct battery selection should be retained for reference.
• Clean the battery contacts and also those of the equipment prior to battery installation.
• Remove exhausted batteries promptly.

This symbol stands for “Conformité Européenne”, which means “Conformity with EU-directives”. With the CEmarking the manufacturer confirms that this product complies with applicable European directives and regulations.

Product Description

• A Display
• B Unit button (backside)
• C Battery compartment (backside)
• D Platform scale

Before First Use

• Check the product for transport damages.
• Remove all the packing materials.
• DANGER Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

Operation

Inserting batteries

• Remove the battery compartment (C) cover at the back of the product.
• Insert 3x AAA 1.5 V batteries.
• Close the battery compartment (C) cover.

Switching on
To switch on the product, lightly step on the platform scale (D).
Alternatively press the unit button (B). 0 is shown on the display (A).

Switching between metric and imperial units

Press the unit button (B) to toggle between metric (kilograms) and imperial (pounds, stones) systems.

NOTICE Only kilograms and pounds units are available for product model B07W4LCWTB.

Weighing

• Step on the platform scale (D) and stand still.
• The display (A) flashes 2 times when the weight is confirmed (3 times for B07W4LCWTB).
• The product automatically turns off after 10 seconds (15 seconds for B07W4LCWTB).

Automatic shutdown

This product is installed with an automatic shutdown function, which is activated when:

• A. The weighed person steps off the scales.
• B. The weight reading is shown on the display (A) for about 10 seconds
  (15 seconds for B07W4LCWTB and B07W7V682K).

Cleaning and Maintenance

NOTICE During cleaning do not immerse the electrical parts of the product in water or other liquids. Never hold the product under running water.

• To clean the product, wipe with a soft, slightly moist cloth.
• Dry the product after cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

FCC – Supplier’s Declaration of Conformity

FCC Compliance Statement

1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
   (1) this device may not cause harmful interference, and
   (2) this device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Canada IC Notice

• This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
  (1) this device may not cause interference, and
  (2) this device must accept any interference, including interference
  that may cause undesired operation of the device.
• This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
• This Class B digital apparatus complies with Canadian CAN ICES‑3(B) / NMB‑3(B) standard.

Disposal

The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its collection centers for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your house hold waste disposal service.