Amazon Basics B005EJH6Z Wireless Mouse with Receiver Guide

Amazon Basics B005EJH6Z Wireless Mouse with Receiver Guide

Contents

• Wireless mouse with nano receiver (inside battery compartment)
• 2 AAA batteries
• Quick start guide

Use

1. Remove the battery cover on the bottom of the mouse.
2. Insert the batteries over the plastic tab. This tab will help you remove the batteries easily.
3. Remove the nano receiver stored between the two batteries.
4. Replace the battery cover.
5. Insert the nano receiver into a USB port on your computer.
6. On the bottom of the mouse, switch button to ON. The LED on the top of the mouse is lit the computer detects the mouse, and the mouse is ready to use.
7. When not in use, turn the mouse OFF. Store the nano receiver inside the battery compartment.

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Responsible party: AmazonBasics

• 410 Terry Avenue North, Seattle, WA 98109-5210, U.S.A. 1-866-216-1072

Radiation Exposure Statement

The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such a function is available.

IC Caution
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Simplified EU Declaration of Conformity

Hereby, Amazon EU S.à.r.l., 5 Rue Plaetis, L-2338 Luxembourg declares that the radio equipment type (AmazonBasics Wireless Mouse with Nano Receiver B005EJH6Z4, BONADNOQ1, B01MZZROPV, B01MYU6XSB, B01N9C2PD3, B01N27QVP7) is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address:

• https://www.amazon.co.uk/do/B005EJH6Z4
• https://www.amazon.co.uk/do/B01NADNOQ1
• https://www.amazon.co.uk/do/B01MZZROPV
• https://www.amazon.co.uk/do/B01MYU6XSB
• https://www.amazon.co.uk/do/B01N9C2PD3
• https://www.amazon.co.uk/dp/B01N27QVP7

Battery Warnings

• Keep batteries out of the reach of children. Insert the batteries in the proper direction as indicated by positive (+) and negative (-) markings in the battery compartment.
• Do not mix old and new batteries or batteries of different types (for example, carbon and alkaline batteries). Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Disposal Regulations.
• If a battery leaks, remove all batteries and recycle or dispose of them in accordance with the battery manufacturer’s instructions and Local and National Disposal Regulations. Before inserting new batteries, thoroughly clean the compartment with a damp paper towel or follow the battery manufacturer’s recommendations for cleanup. If fluid from the battery comes into contact with skin or clothes, flush with water immediately. Remove batteries if your device is to be stored for an extended period of time without being used.

Safety and Compliance
Read this instruction manual carefully before using the product. It contains important information for your safety as well as operating and maintenance advice. Observe all safety instructions to avoid damage through improper use! Follow all warnings on the product. Keep this instruction manual for future use. Should this product be passed on to a third party, then this instruction manual must be included.

• Never use this product if damaged.
• Do not insert any foreign objects into the inside of the casing.
• Protect the product from extreme temperatures, hot surfaces, open flames, direct sunlight, water, high humidity, moisture, strong jolts, flammable gases, vapors, and solvents.
• Keep this product and its packaging out of the reach of children and pets.
• Warning! Do not look directly at the LED light.

Troubleshooting

• The mouse does not operate or is not recognized.
• Make sure the batteries are installed correctly. Match the +/- symbols on the battery to the +/- symbols in the battery compartment.
• Make sure the power switch is in the ON position.
• Try plugging the receiver into a different USB port.
• Press the CONNECT button, and make sure the LED on the top of the mouse lights.
• If the LED on the top of the mouse still does not light, turn the mouse off, and then on.
• If the LED on the top of the mouse still does not light, replace the batteries.

The cursor moves erratically or misses button clicks.

• Remove metal objects between the mouse and the receiver.
• Place the receiver away from other electrical devices.
• Try moving the receiver closer to the mouse.
• Check battery power by turning the mouse off, and then on. If the LED on the top of the mouse does not light, replace the batteries.

The LED on the top of the mouse is lit.

• This indicates the batteries are low. Replace the batteries.
• If the LED is lit constantly for 10 seconds, the batteries have sufficient power.
• If the LED is flashing once every second, the batteries are low.
• If the LED is flashing four times every second, the batteries are severely low. The mouse cursor at this moment can not be moved.
• If the LED is flashing twice and then turning off, this means the connect button on the mouse bottom is stuck Release the button.

Specifications

• Frequency / Modulation type: 2.403 – 2.480 GHz / GFSK
• Transmitter power: 0 dBm max.
• Power rating: Mouse: 2 pieces of AAA batteries fam lICD hast
• Operation distance: 10 meters without signal disturbance and no direction limit
• Morse resolution: 1000 DPI
• Operating temperature: 0 °C to ÷40 °C
• Storage temperature: -40 °C to ÷65 °C
• Supported operating systems: Windows® 7 / 8 / 8.1 /10

Disposal

Regulatory information: Disposal of Waste Electrical and Electronic Equipment (WEEE) The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimize the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed of separately from ordinary household wastes at its end of life.

Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its own collection centers for electrical and electronic equipment recycling. For information about your recycling drop-off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.

Used batteries must not be disposed of through household garbage, since they might contain toxic elements and heavy metals that can be harmful to the environment and human health. Consumers are therefore obligated to return batteries to retail or local collection facilities free of charge. Used batteries will be recycled. They contain important raw materials such as iron, zinc, manganese, or nickel. The crossed-out wheelie bin symbol indicates that batteries and rechargeable batteries must not be disposed of through household garbage.

REFERENCE LINK

DOWNLOAD PDF LINK

Amazon Basics B005EJH6Z Wireless Mouse with Receiver Guide