BN-LINK U167J Plug In Power Energy Meter User Manual
The product may be provided by a monovalent Rate the value displayed electricity Cost. Can view Total Year Month Week Day Hour.
Viewing Electrical Parameters
After the product is powered on, the voltage interface is displayed by default.
Legend:
Press the AmP/- button in any other interface to display the current interface and display the current value flowing through the load. (Displayed to 2 decimal places )
Legend:
Press the Watt/VA button in any other interface to display the effective power value of the load. (Decimal displayed. 
Legend:
In the display VA interface, press the Watt/VA button again to display the effective power value of the load. Press the Hz/PF button in any other interface to display the power frequency Hz. (Display to 1 decimal place.)
Legend
“is flashing. In the display Elapsed Time interface, press the KWH/Hour button again to display the cumulative power consumption KWH value. Keep the same interface until there is a button to switch to another interface. Set the Unit Price Rate 2.11 n any interface, press and hold the SET button for 3 seconds to enter the unit price setting 
SAVE will be displayed briefly, then exit after 0.5 seconds and return to the interface before entering the setting.
COST Query
Press the COST button to check the electricity cost COST. First, display the total cost. Calculated based on the latest unit price.
Special Functions
Data such as KWH, Elapsed Time, Total COST, etc., will increase over time and exceed the maximum display range of the screen. Once the maximum display range is exceeded, it will switch to this display interface and flash a reminder. The function of clearing accumulated data. In any display interface, after long-pressing the RESET button for 3 seconds, the data of KWH, Elapsed Time, and Total COST .
Technical Parameters
Power supply: 125VAC, 60Hz
Load: Maximum 15A 1875W resistive and TUNGSTEN, 1/2HP
DOWNLOAD PDF
BN-LINK U167J Plug In Power Energy Meter User Manual
