BOOMPODS Orbit ANC Hybrid Noise-Cancelling Headphones User Guide
In the box
Overview
How to connect
Power on headset and it will auto turn connectable. On phone, search “orbit” and tap to connect. It will auto reconnect to the last device in connectivity record. If you want to make search again, power it off and press and hold MB for 4s.
Multi-Point Connection
Connect as above, then switch off Bluetooth on that device and start pairing procedure on 2nd device. You will now then have a choice of 2 device to play from.
Function
- Power-on: Hold MFB for 2s
- Power-off: Hold MFB for 4s
- Answer/end call: Press MFB
- Ignore call: Hold MFB for l.5 s
- Skip track backward: Hold Volume-for ls
- Skip track forward: Hold Volume+ for ls
- Volume up: Press Volume+
- Volume down: Press Volume-
- Voice assistant: Triple press MFB
- Playback/pause: Press MFB
- Gaming mode: Double press MFB
- Switch mode: Press ANC Button to switch among ANC ON,
Factory Settings
Power on headset, press and hold both volume + and – for 1 Os or until LED blinks red 3 times to reset it factory
LED
- Connected: LED blinks white every 10s Charging: LED glows solid red
- Top-up: LED glows solid white
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
