Table of contents
show
Kenwood BT-16 Handheld Alkaline Battery Case User Manual
GET STARTED
CAUTION
- Do not short circuit the terminals.
- When carrying a battery case containing alkaline batteries, place the battery case in the supplied carrying poach.
- Remove the batteries when not using the battery case for a long period.
- Transmit using low power.
- Do not use rechargeable batteries or manganese batteries.
- Do not change the batteries in hazardous and/or wet locations.
- Do not mix old batteries with new batteries. Likewise, do not mix different types of batteries.
- This product is not water resistant.
OPENING THE BATTERY CASE
To open the battery case, lift the cover while pushing both lock levers.
- Insert six AAA (LR03) alkaline batteries into the battery case.
- Be sure to match the polarities with those marked in the bottom of the battery case.
- When installing alkaline batteries into the battery case, insert them from the negative (–) side.
- When removing alkaline batteries from the battery case, lift them from the positive (+) side.
INSTALLING/ REMOVING THE BATTERY CASE
- To install/ remove the battery case to/from the transceiver, refer to “Installing/ Removing the Battery Pack” in the transceiver Instruction manual.
- When changing the batteries, remove the battery case from the transceiver before opening the battery case.
INSTALLING THE BELT CLIP
When attaching a belt clip to the battery case, refer to “Installing the Belt Clip” in the transceiver instruction manual.
REFRENCE LINK
https://kenwoodcommunications.co.uk/acc/batteries/case/BT-16/
