Table of contents
show
SACKit Chargeit Dock Wireless Charger User Manual![SACKit-Chargeit-Dock-Wireless-Charger-User-Manual-Image](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIyNzYiIGhlaWdodD0iMjEzIiB2aWV3Qm94PSIwIDAgMjc2IDIxMyI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
IMPORTANT SAFETY INFORMATION
We are not responsible for damage caused by failure to comply with the instructions or irresponsible use of the product.
- Do not disassemble or replace any parts of this device. Please contact professional maintenance or qualified service center if there is any damage to the device.
- Do not expose this device to rain, water or wet places. Do not place liquid containers on the product side.
- Do not place in or close to any liquid
- If any liquids flows inside the product, please shut down the product and contact customer service center
- Do not place this device in or close to sources of excessive heat or fire.
BOX CONTENT
- 1 x CHARGEit
- 1 x Quick start guide
- 1 x USB-C charging cable
QUICK START GUIDE
- Plug CHARGEit to power supply with the USB-C cable (adaptor not included)
- Charge CHARGEit for 3 hours minimum for full power bank
Use CHARGEit as power bank
- Switch CHARGEit on by pressing the POWER button
- You can use wireless charging by placing your unit on the X if unit supports wireless charging
- You can use cabled charging by plugging in the cable from your unit to the CHARGEit USB-port
- You can charge one unit wirelessly and one unit cabled simultaneously
- CHARGEit power bank will switch off automatically when not in use for one minute
Use CHARGEit while in power supply
- Plug in CHARGEit to power supply
- You can use wireless charging by placing your unit on the X if the unit supports wireless charging
- You can use cabled charging by plugging in the cable from your unit to the CHARGEit USB-port
Correct storage and transportation of CHARGEit
- When you need to take CHARGEit on the go please use the included carrying bag to protect the beautiful surface of the power bank
- CHARGEit power bank needs to be carried in your hand luggage when flying
Button and Indicator Functions![SACKit-Chargeit-Dock-Wireless-Charger-User-Manual-Image-1](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIyOTYiIGhlaWdodD0iMzAwIiB2aWV3Qm94PSIwIDAgMjk2IDMwMCI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
- Switch: Power ON/OFF CHARGEit
- USB output: Here you can connect devices to be charged via cable
- USB type-C input: Here you need to connect the included charging cable to charge CHARGEit power bank
- Power LED indicators: Show the level of power on the power bank
- Wireless Charging LED indicator: The blue LED light will switch on for 30 sec when wireless charging is active
FIRST USE
- Connect an adaptor to a power outlet. See page 6 for a guide to choosing the correct adaptor
- Connect the included cable (USB side) to the adaptor
- Plug the USB-C side of the charging cable in to CHARGEit
CHOOSE THE CORRECT ADAPTOR FOR CHARGEit
Choosing the correct adaptor is very important for your safety and the function of CHARGEit. There are different options for adaptors as described below:
- QC2.0 output 5V/2A, 9V/1.67A
- QC3.0 output 5V/3A, 9V/2A, 12V/1.5A
SACKit recommends that you choose a QC2.0 or QC3.0 adaptor to achieve the best stability and function of CHARGEit. Using the QC1.0 adaptor might result in an overheated CHARGEit or phone or might malfunction
the product. SACKit will not be responsible for any issues or safety hazards arising from the use of a QC1.0 adaptor. QC2.0 and QC3.0 adaptors can be purchased on various websites.
TROUBLESHOOTING
If these solutions does not fix your problem please contact our customer service at info@sackit.dk.
CHARGEit charges slowly
- Check that all cables are connected correctly
- Make sure you have chosen either a QC2.0 or QC3.0 adaptor
The blue LED indicator is blinking and the phone is not charging
- Make sure your phone is placed correctly on the X in the middle of CHARGEit
- Power ON/OFF your phone and retry
- Make sure your phone supports wireless charging
I am not able to charge CHARGEit power bank
- You need to make sure you have chosen the correct adaptor for your CHARGEit. See page 6 for a guide to make the choice of adaptor
I feel CHARGEit is charging my phone too slowly
- CHARGEit only supports Fast Charging if your phone supports the feature. See page 6
My phone or CHARGEit is very varm
- You need to ensure you have chosen the correct adaptor for CHARGEit. See page 6 for a guide
- The power bank must not be covered as this might result in overheating
CLEANING OF THE PRODUCT
- Kindly switch off CHARGEit before you clean it
- Do not use any chemicals to clean the product. If you need to clean the power bank please use a soft cloth with a mild cleaner
- Use a damp cotton or microfiber cloth for cleaning
- Large amounts of water and fluids may damage CHARGEit
TECHNICAL SPECIFICATIONS
- Model: CHARGEit power bank & wireless charger
- Capacity: 3.7V 6000mAh
- Material: ABS + PC, Aluminium
- Input: 5V/2A 9V/1.67A • Qi output: 5W, 7.5W, 10W
- Distance for Qi wireless pad: <8mm
- Convertion: >72%
- Frequenzy: 110-205KHz
- Size: 105*105*13mm
- Weight: 205g