Cleer Audio Wireless Neck Speaker User Manual

cleer logo

Cleer Audio Wireless Neck Speaker User Manual


Box contents






  1. Short press the Power/Bluetooth button to power ON your HALO.
    1.  HALO will go into pairing mode automatically when powered ON for the first time (if HALO does not automatically go into pairing mode when powered ON for the first time, follow the steps on page 4
      to go into pairing mode manually) ” HALO will automatically connect to the last connected device if it is in range and available for pairing
  2.  Find “Cleer HALO” on the Bluetooth device list to pair
  3.  Put the flexible neckband around the back of your neck with the speakers resting on your upper chest area
    Enjoy your HALO.
    1.  Make sure HALO is worn evenly on your for the best experience ” The speakers of HALO can come together and form a loop with the neckband.
  4.  Long press the Power button to power OFF your HALO




  1.  HALO is ON
  2.  Turn on NFC on your device and place it on top of the left speaker housing
  3.  HALO is now paired
  4. For NFC enabled devices only.

Cleer-audio-wireeless-neck-speaker-image-5Pairing Mode

  1.  HALO is ON. Short press the Power/Bluetooth button to go into pairing mod e
  2.  Find “Cleer HALO” on the Bluetooth device list
  3. HALO is now paired.

Audio Control



Cleer Limited Warranty

(United States Only)

Cleer Limited warrants this product against defects in material or workmanship for (1) year as set forth below when purchased directly from Cleer Limited or a Cleer Limited retailer. Pursuant to this Limited Warranty, Cleer Limited will, at its option, (i) repair the product using new or refurbished parts or (ii) replace the product with a new or refurbished product.

For purposes of this Limited Warranty, “refurbished” means a product or part that has been returned to its original specifications. In the event of a defect, these are your exclusive remedies.


To obtain warranty service, you must deliver the Product, freight prepaid, in either its original packaging or packaging affording an equal degree of protection to the original Cleer Limited retailer (point of purchase) or Cleer Limited Customer Service.

It is your responsibility to backup any data, software or other materials you may have stored or preserved on your unit. It is unlikely that such data, software or other materials will be lost or reformatted during service and Cleer Limited will not be responsible for any such damage or loss.

A dated purchase receipt from Cleer Limited or a Cleer Limited retailer is required. For specific instructions on how to obtain warranty service for your product, Visit the Cleer Limited website: Or call Cleer Limited Customer Service at: 1 888 672 5337 (67 CLEER) For an accessory or part not available from your authorized dealer call: 1 888 672 5337 (67 CLEER)

Following warranty service your original Product or a replacement Product will be returned to you as your Product was configured when originally purchased.Repair / Replacement Warranty:

This Limited Warranty shall apply to any repair, replacement part or replacement product for the remainder of the original Limited Warranty period or for (90) days,whichever is longer. Any parts or product replaced under this Limited Warranty will become property of Cleer Limited.

Compliance with FCC rules

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
    1.  This device may not cause harmful interference.
    2.  This device must accept any interference received, including interference that may cause undesired operation.
  2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
    authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.Radiation Exposure Statement:
  • This equipment complies with FCC radiation exposure requirement.
  • The device can be used in portable exposure condition without RF restriction.



Leave a Reply