You are currently viewing Cocoon HE160232  8 Camera Home Security System Instruction Manual

Cocoon HE160232 8 Camera Home Security System Instruction Manual

Cocoon logo

Cocoon HE160232 8 Camera Home Security System Instruction Manual

Cocoon-HE160232- 8-Camera-Home-Security-System-Image-1

Camera Specifications

  • Image Sensor: 1/3” Colour CMOS Sensor
  • Video Resolution: 976 x 496
  • Video System: PAL
  • Infrared IRs: 24
  • Day/Night mode: Smart IR Cut Filter
  • Night Vision Distance: Max 24m
  • Scan Frequency: 50Hz
  • Minimum Illumination: 0 Lux (IR On)
  • Backlight Compensation: Auto
  • Electronic Shutter: 1/50~10,000 AUTO
  • Gain Control: Auto
  • Lens: F=3.6 ~ 60 degrees
  • Operating Temperature: -10 – 50C

Installation

 Installation Location
  • Before installing the Home Security System, it is essential to plan where to locate the DVR unit. Below are a few points to consider:
  •  The DVR unit should be positioned in a central location with easy access to mains power,cameras and installed cables
  • If you plan to use remote viewing features, the DVR unit should be located near your modem /router or Ethernet network point
  •  The DVR unit should be installed in a secure location to avoid tampering
  •  Do not place heavy objects on top of the DVR unit
  •  Do not block ventilation holes on the top and sides of the DVR unit or use in an enclosed area as this may cause overheating
  • Plan out where you would like to place your cameras and test all connections BEFORE permanently installing cables and cameras.
  • Cameras should be placed covertly indoors where you do not want to see them every day
  • Outdoor Cocoon HE160232 8 Camera Home Security System can be placed in plain sight to act as a deterrent to would-be intruders.

Operation

  1.  Single – Switch to single view mode. Select the camera to view
  2.  Multi – Switch to split screen mode
    TIP: Alternatively, use the mouse and double click with LMB on the image to switch between the two modes
  3. Stop/Start Scan – Automatically changes the single camera view at a selected interval. See 4.4.2 Live for more details
  4.  Colour – Adjust the colour settings of the selected camera
  5.  E-Zoom – Click and drag to draw a box in the bottom left window to zoom-in on the selection, right-click to return to full screen mode

DOWNLOAD PDF

 

Leave a Reply