Table of contents
show
Cocoon HE180425 Smart Outdoor Camera User Manual
BEFORE YOU START
Before you begin, make sure you have:
- A mobile device – Android (V4.1 or later) or iOS (V8 or later)
- Batteries installed and charged via USB charging cable
Note: It will take approximately 10 hours for batteries to fully charge - A Wi-Fi connection (have the password handy)
- Download the Cocoon Connect app
For detailed instructions and videos, visit www.cocoonproducts.com.au.
App Setup
CONFIRM PAIRING MODE
- The LED indicator light will be flashing red/blue. The camera will say ‘The camera is now ready to begin pairing’
- If you have issues with this step, hold down the internal reset button for 5 seconds and start again
- If you are still having issues, please check your instruction manual.
Add the OUTDOOR CAMERA
Connect the outdoor camera to Wi–fi
- Enter the Wi-Fi password and select Confirm.
- Scan with the camera
If you have any issues with this step, ensure your Wi-Fi password is correct
If you are still having issues, please check your Instruction Manual
SCAN THE QR CODE WITH THE CAMERA
- Hold the mobile phone 15 to 20cm in front of the Outdoor Camera for the camera to scan the QR code
- The camera will beep when the code is scanned
- Press ‘Heard the Beep
Camera added successfully
control your Outdoor Camera
Use, manage, and control your Smart Outdoor Camera from the Cocoon Connect app.
